Taigen Sound Cards

Taigen announced in 2017 plans to release a new version of their MFU with standalone sound boards. To use these with the TCB select Taigen Sound Cards on the Sounds tab of OP Config. You will also need to make a simple adapter cable. On the TCB side you need a standard 3-pin servo plug, and on the Taigen side you need a 4-pin JST PH plug. Connect this cable to the Prop 1 output on the TCB. The +5v signal from the TCB (middle pin on the servo connector) will actually need to be attached to two pins on the Taigen card. See the diagram below:

The following sounds have been identified on the Taigen sound card:

• Engine start and stop sounds
• Engine idle and up to 6 forward speed sounds
• Barrel elevation
• Turret rotation
• Cannon fire
• Machine gun fire
• Cannon hit
• Vehicle detroyed

This video from Taigen illustrates functionality with an early prototype: