Show page

Menu

Search

Random Fact

This Wiki has 49 million pages and took 10 years to write!
(Well, close...)

If you like the Open Panzer project we accept donations!

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
Last revision Both sides next revision
wiki:tcb:tcbinstall:sound_taigen_v1 [2017/07/26 03:15]
opadmin [Taigen Sound Cards] 		wiki:tcb:tcbinstall:sound_taigen_v1 [2017/07/26 03:35]
opadmin
Line 4: Line 4:
  
 ====== Taigen Sound Cards ====== ====== Taigen Sound Cards ======
-Taigen announced in 2017 plans to release a new version of their MFU with standalone sound boards. To use these with the TCB select **Taigen Sound Cards** on the [[wiki:opconfig:tabs:sounds|Sounds]] tab of OP Config. You will also need to make a simple adapter cable. On the TCB side you need a standard 3-pin servo plug, and on the Taigen side you need a 4-pin JST PH plug. Connect this cable to the Prop 1 output on the TCB. The +5v signal from the TCB (middle pin on the servo connector) will actually need to be attached to two pins on the Taigen card. See the diagram below: +Taigen announced in 2017 plans to release a new version of their MFU with standalone sound boards. To use these with the TCB select **Taigen Sound Cards** from the drop-down list on the [[wiki:opconfig:tabs:sounds|Sounds]] tab of OP Config. You will also need to make a simple adapter cable. On the TCB side you need a standard 3-pin servo plug and on the Taigen side you need a 4-pin JST PH plug. Connect this cable to the Prop 1 output on the TCB. The +5v signal from the TCB (middle pin on the servo connector) will actually need to be attached to two pins on the Taigen card. See the diagram below: 
 \\ \\
  
wiki/tcb/tcbinstall/sound_taigen_v1.txt ยท Last modified: 2017/10/18 17:22 by opadmin
Show pageSitemap
AdminBack to top