Show page

Menu

Search

Random Fact

This Wiki has 49 million pages and took 10 years to write!
(Well, close...)

If you like the Open Panzer project we accept donations!

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
Next revision Both sides next revision
wiki:tcb:tcbinstall:sound_benedini_v3 [2019/09/05 03:18]
opadmin [Diagnostic / Misc Tab] 		wiki:tcb:tcbinstall:sound_benedini_v3 [2019/12/10 12:04]
opadmin [Connecting to the TCB]
Line 12: Line 12:
 The TCB has three RC outputs dedicated to the Mini. They are labeled Prop1, Prop2, and Prop3 which are the same labels used on the Mini.  The TCB has three RC outputs dedicated to the Mini. They are labeled Prop1, Prop2, and Prop3 which are the same labels used on the Mini. 
  
-Note that the Mini has //two// Prop 1 connections, one for incoming and one for outgoing. Connect the TCB to the //incoming// Prop 1 connection. +Note that the Mini has //two// Prop 1 connections, one for incoming and one for outgoing. Connect the TCB to the //incoming// Prop 1 connection on the Mini. 
  
 Use male-to-male servo cables for the connection. The TCB will supply all the power necessary to the Mini.  Use male-to-male servo cables for the connection. The TCB will supply all the power necessary to the Mini. 
Line 86: Line 86:
 [[http://openpanzer.org/downloads/sounds/benedini/tbsv4/OP_TBS_PropSettings_FlashV4_Mini2.tbc|For Flash v4 and Mini V2]] [[http://openpanzer.org/downloads/sounds/benedini/tbsv4/OP_TBS_PropSettings_FlashV4_Mini2.tbc|For Flash v4 and Mini V2]]
  
-Download the file to your computer then in TBS Flash v4 go to File->Open PropSettings and import the file. (In Flash v3 you need to click the **Load** File button in on the Misc tab.) Now it is wise to verify the Prop 1, 2, and 3 numbers match the screenshot below. Finally, click the **Write** Device button to save these prop settings to your Mini. +First download the file to your computer. For TBS Flash v4 go to **File** menu and select **Open PropSettings** to import the file. For TBS Flash v3 click the **Load** File button on the Misc tab to import the file. Now it is wise to verify the Prop 1, 2, and 3 numbers match the screenshot below. Finally, click the **Write** Device button to save these prop settings to your Mini. 
  
 That's it! Your Mini is ready to go.  That's it! Your Mini is ready to go. 
wiki/tcb/tcbinstall/sound_benedini_v3.txt ยท Last modified: 2022/02/10 21:02 by opadmin
Show pageSitemap
AdminBack to top