Differences
This shows you the differences between two versions of the page.
Both sides previous revision Previous revision Next revision | Previous revision | ||
wiki:tcb:tcbinstall:servobarrel [2016/03/26 04:24] opadmin [Barrel Elevation Servo] |
wiki:tcb:tcbinstall:servobarrel [2016/03/26 04:27] opadmin [Barrel Elevation Servo] |
||
---|---|---|---|
Line 5: | Line 5: | ||
====== Barrel Elevation Servo ====== | ====== Barrel Elevation Servo ====== | ||
- | You have several options for controlling the barrel elevation movement. If you are using a stock Tamiya, Heng-Long or Taigen kit, you probably want to use the onboard [[wiki: | + | You have several options for controlling the barrel elevation movement. If you are using a stock Tamiya, Heng-Long or Taigen kit, you probably want to use the onboard [[wiki: |
- | The servo pan effect is intended to be used with any standard hobby servo, but it modifies the way your transmitter stick controls the servo. Typically a servo will move in conjunction with your stick movements, and when you return the transmitter stick to center, the servo also returns to center. With the **Pan Effect** stick movements will actually be converted to //speed// commands, not absolute position commands. If you move the stick a very small amount in one direction, the servo will start moving very slowly in that direction and //keep moving// in that direction until you return the stick to center. Stick centered means "zero speed," | + | The servo pan effect is intended to be used with any standard hobby servo, but it modifies the way your transmitter stick controls the servo. Typically a servo will move in conjunction with your stick movements, and when you return the transmitter stick to center, the servo also returns to center. With the **Pan Effect**, stick movements will actually be converted to //speed// commands, not absolute position commands. If you move the stick a very small amount in one direction, the servo will start moving very slowly in that direction and //keep moving// in that direction until you return the stick to center. Stick centered means "zero speed," |
{{ wiki: | {{ wiki: | ||
- | If you do select a servo for barrel elevation, you may also want to set custom end-points on your servo travel. But because the radio' | + | If you do select a servo for barrel elevation |
While in this menu use the barrel elevation stick to adjust the end points. Use the steering stick to select which end-point you are adjusting. And use the throttle stick to reverse the servo' | While in this menu use the barrel elevation stick to adjust the end points. Use the steering stick to select which end-point you are adjusting. And use the throttle stick to reverse the servo' |