Differences

This shows you the differences between two versions of the page.

--- wiki:tcb:tcbinstall:mechrecoil [2016/03/13 19:01]
opadmin [Taigen/Asiatam Recoil Units]
+++ wiki:tcb:tcbinstall:mechrecoil [2016/03/13 19:03]
opadmin [Taigen/Asiatam Recoil Units]
@@ Line 15: / Line 15: @@
 ==== Taigen/Asiatam Recoil Units ====
-The TCB is compatible with Taigen/Asiatam mechanical recoil units, but they must be re-wired. This requires some very simple soldering. You can still use the same 3-pin plug that comes with the recoil unit unit, so no extra parts are required. After the modification is done, the unit will plug into the RECOIL port on the TCB.
+The TCB is compatible with Taigen/Asiatam mechanical recoil units, but they must be re-wired. This requires some very simple soldering. You can still use the same 3-pin plug that comes with the recoil unit, so no extra parts are required. After the modification is done, the unit plugs into the RECOIL port on the TCB.
 For correct operation, make sure you select **Mechanical Recoil** as the **Mechanical Barrel** type on the [[wiki:opconfig:tabs:motors#mechanical_barrel|Motors tab]] of OP Config (as opposed to the other option which is Airsoft).
@@ Line 21: / Line 21: @@
 See the video and photos below for instructions on how to modify the recoil unit.
+\\
 {{ youtube>lFB5zhplN2Q?large |Taigen Mechanical Recoil}}

wiki/tcb/tcbinstall/mechrecoil.txt · Last modified: 2017/01/09 21:36 by opadmin

Mechanical Recoil