Differences

This shows you the differences between two versions of the page.

--- wiki:tcb:tcbinstall:hiflash [2016/03/10 04:55]
opadmin [High Intensity Flash]
+++ wiki:tcb:tcbinstall:hiflash [2017/02/08 02:09]
opadmin [High Intensity Flash]
@@ Line 12: / Line 12: @@
 The default setting is to have the flash unit automatically triggered whenever the [[wiki:tcb:operation:functionlist#cannon_and_related_functions|Cannon Fire function]] occurs. However, for non-standard applications you can separate the flash unit from the cannon fire by un-checking the **Trigger with cannon** option on the [[http://openpanzer.org/wiki/doku.php?id=wiki:opconfig:tabs:lightsio#high_intensity_flash_unit|Lights & I/O tab]] of OP Config. In that case a new function named [[wiki:tcb:operation:functionlist#cannon_and_related_functions|High Intensity Flash]] will appear in the Function List. It can then be assigned to any trigger independent of the cannon event.
+**Note:** Want to use a regular LED for your muzzle flash instead? Connect it to the Aux Output connector (with a suitable resistor inline), and under the Aux Output settings on the [[http://openpanzer.org/wiki/doku.php?id=wiki:opconfig:tabs:lightsio|Lights & IO]] tab of OP Config check the "Auto Flash with Cannon" option.
 \\
@@ Line 31: / Line 33: @@
 {{ wiki:flash_tcb.jpg?direct&500 |High Intensity Flash Unit - Connected to TCB}}
 <html><center></html>
-//Modified flash unit connected to TCB.//
+//Connect the modified unit to the FLASH port on the TCB.//
 <html></center></html>

wiki/tcb/tcbinstall/hiflash.txt · Last modified: 2017/02/08 02:11 by opadmin

High-Intensity Flash