Differences
This shows you the differences between two versions of the page.
| Both sides previous revision
Previous revision
Next revision
|
Previous revision
Next revision
Both sides next revision
|
wiki:tcb:operation:troubleshooting [2018/02/12 18:38]
opadmin [Troubleshooting] |
wiki:tcb:operation:troubleshooting [2019/04/19 21:30]
opadmin [Troubleshooting] |
| <li><p>Is the Fight/Repair switch on the TCB set to Repair? If so, there is no recoil or Airsoft action and the flash unit also isn't triggered.</p></li> | <li><p>Is the Fight/Repair switch on the TCB set to Repair? If so, there is no recoil or Airsoft action and the flash unit also isn't triggered.</p></li> |
| <li><p>Also make sure you haven't disconnected these actions from the Cannon Fire function. On the </html>[[wiki:opconfig:tabs:motors|Motors tab]]<html> of OP Config make sure Mechanical Barrel and Recoil Servo are set to <b>Trigger with Cannon</b>. On the </html>[[wiki:opconfig:tabs:lightsio#high_intensity_flash_unit|Lights & I/O tab]]<html> make sure the High Intensity Flash Unit is set to <b>Trigger with Cannon</b></p></li> | <li><p>Also make sure you haven't disconnected these actions from the Cannon Fire function. On the </html>[[wiki:opconfig:tabs:motors|Motors tab]]<html> of OP Config make sure Mechanical Barrel and Recoil Servo are set to <b>Trigger with Cannon</b>. On the </html>[[wiki:opconfig:tabs:lightsio#high_intensity_flash_unit|Lights & I/O tab]]<html> make sure the High Intensity Flash Unit is set to <b>Trigger with Cannon</b></p></li> |
| | <li><p>Make sure you have not disabled Airsoft with a <a href="http://openpanzer.org/wiki/doku.php?id=wiki:tcb:operation:functionlist#cannon_and_related_functions">function trigger</a>.</p></li> |
| </ol> | </ol> |
| <br /> | <br /> |
| </ol> | </ol> |
| |
| | <li><p><b>My tank is constantly taking IR hits even though no one is shooting at me!</b></p></li> |
| | <ol> |
| | <li><p>Are you using an electrical slipring to achieve 360* turret rotation? These devices are electrically noisy and if you run the IR wires through them your model will falsely interpret this noise as an IR hit. Likewise the IR signal you send out when firing the cannon may become garbled when traveling through the slipring, and you may have difficulty hitting opponents. For this reason if you wish to implement IR functionality in your model you should not use slipring systems but instead wire the IR components directly. Try also to keep the IR reception wires especially away from other noisy signal lines, such as the wires which power the turret rotation and elevation motors, or any airsoft, mechanical or servo recoil wires.</p></li> |
| | </ol> |
| |
| </ol></html> | </ol></html> |