Show page

Menu

Search

Random Fact

This Wiki has 49 million pages and took 10 years to write!
(Well, close...)

If you like the Open Panzer project we accept donations!

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
Last revision Both sides next revision
wiki:opconfig:gs:connectto [2019/05/23 19:49]
opadmin [Direct Connection with USB Cable] 		wiki:opconfig:gs:connectto [2019/05/23 19:51]
opadmin [Direct Connection with USB Cable]
Line 34: Line 34:
   * **Wrong Dipswitch Setting:** Make sure Dipswitch #5 is in the correct position for the method you are using to connect. Set Dipswtich #5 to On if you are connecting with a USB cable. Set it to Off if you are trying to connect over the Serial 1 port (for example, with a Bluetooth adapter).    * **Wrong Dipswitch Setting:** Make sure Dipswitch #5 is in the correct position for the method you are using to connect. Set Dipswtich #5 to On if you are connecting with a USB cable. Set it to Off if you are trying to connect over the Serial 1 port (for example, with a Bluetooth adapter). 
   * **Alternate Connection Method:** If all else fails, try creating a connection using the longer two-step process. As usual select the correct COM Port, but instead of trying to connect go to the Firmware tab of OP Config and click the Snoop button. If a Snoop connection is successful you will see a notification to that effect at the bottom of the window, and the TCB will spit out some information in the console window. It may be a lot of information if the radio receiver is connected/detected. The Snoop connection only listens to the TCB, it doesn't talk. But if that part works, you are already halfway to a full connection. After the TCB has completed printing debug information, now click the Connect button and the full communication connection should be made.   * **Alternate Connection Method:** If all else fails, try creating a connection using the longer two-step process. As usual select the correct COM Port, but instead of trying to connect go to the Firmware tab of OP Config and click the Snoop button. If a Snoop connection is successful you will see a notification to that effect at the bottom of the window, and the TCB will spit out some information in the console window. It may be a lot of information if the radio receiver is connected/detected. The Snoop connection only listens to the TCB, it doesn't talk. But if that part works, you are already halfway to a full connection. After the TCB has completed printing debug information, now click the Connect button and the full communication connection should be made.
-  * {{ wiki:usbpowermanage.jpg?direct&300|Board Layout}}**Windows Turning the COM Port Off:** If even the alternate connection method isn't working, check to make sure Windows isn't turning off your COM port in order to save power. You can check this setting by opening **Device Manager**, then expand the **USB Serial Bus controllers** heading. Here you will find one or more items called **USB Root Hub**. Right-click on each one and select Properties, then on the Power Management tab un-check the option that says "Allow the computer to turn off this device to save power." +  * {{ wiki:usbpowermanage.jpg?direct&200|USB Power Management}}**Windows Turning the COM Port Off:** If even the alternate connection method isn't working, check to make sure Windows isn't turning off your COM port in order to save power. You can check this setting by opening **Device Manager**, then expand the **USB Serial Bus controllers** heading. Here you will find one or more items called **USB Root Hub**. Right-click on each one and select Properties, then on the Power Management tab un-check the option that says "Allow the computer to turn off this device to save power." 
 ===== Wireless Connection Over Bluetooth ===== ===== Wireless Connection Over Bluetooth =====
  
wiki/opconfig/gs/connectto.txt ยท Last modified: 2019/05/23 19:52 by opadmin
Show pageSitemap
AdminBack to top