Differences

This shows you the differences between two versions of the page.

--- wiki:tcb:tcbinstall:bluetooth [2016/04/07 21:32]
opadmin [Required Items]
+++ wiki:tcb:tcbinstall:bluetooth [2016/04/07 21:33]
opadmin [Set the Alternate COM Dipswitch on the TCB]
@@ Line 29: / Line 29: @@
 </center></html>
-=== Bluetooth Module ===
+=== 2. Bluetooth Module ===
 If your computer or tablet doesn't already have Bluetooth capability built-in, you will need a Bluetooth v2.1 or later module. We recommend this **[[https://www.adafruit.com/product/1327|Bluetooth 4.0 USB Module]]**, also from Adafruit.
@@ Line 47: / Line 47: @@
 ===== Set the Alternate COM Dipswitch on the TCB =====
 {{ wiki:dip_connect.jpg?nolink|Dipswitch #5}}
-Dipswitch #5 on the TCB is used to determine which serial port the TCB will communicate to the computer with. If Dipswitch #5 is On, the TCB will communicate via the **USB** port. If it is Off the TCB will communicate over the **Serial 1** (SER.1) port. The Bluetooth adapter will be plugged into the **Serial 1** connector, so in this case we want to make sure Dipswitch #5 is in the Off position.
+Dipswitch #5 on the TCB is used to determine which serial port the TCB will communicate to the computer with. If Dipswitch #5 is On, the TCB will communicate via the **USB** port. If it is Off the TCB will communicate over the **Serial 1** port. The Bluetooth adapter will be plugged into the **Serial 1** connector, so in this case we want to make sure Dipswitch #5 is in the Off position.
 ===== Pairing =====

wiki/tcb/tcbinstall/bluetooth.txt · Last modified: 2019/01/20 18:52 by opadmin

Bluetooth