Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision Both sides next revision
wiki:tcb:operation:driving [2016/03/27 18:01]
opadmin [Basic Movement]
wiki:tcb:operation:driving [2016/03/27 18:49]
opadmin [Basic Movement]
Line 21: Line 21:
 The TCB allows you any control scheme you want, even unusual ones. Want to control the tank's forward speed with a slider on the side of your transmitter? Ok, you can. But the basic assumption is that you will use one of the sticks on your transmitter to handle movement and steering. We will call this the "drive stick." The drive stick can be the left or right stick of your transmitter depending on your preference.  The TCB allows you any control scheme you want, even unusual ones. Want to control the tank's forward speed with a slider on the side of your transmitter? Ok, you can. But the basic assumption is that you will use one of the sticks on your transmitter to handle movement and steering. We will call this the "drive stick." The drive stick can be the left or right stick of your transmitter depending on your preference. 
  
-When using a drive stick the controls are fairly intuitive as shown in the graphic. There is one thing to know - the TCB allows you to set a Change Direction Delay which prevents the model from changing direction from forward to reverse (or vice versa) without first coming to a stop and letting the delay expire. The delay can be set very small, even a fraction of a second - or it can be disabled completely. By +When using a drive stick the controls are fairly intuitive as shown in the graphic. There is one thing to know - the TCB allows you to set a Change Direction Delay which prevents the model from changing direction from forward to reverse (or vice versa) without first coming to a stop, returning the stick to center, and letting the delay expire. The delay can be set very small, even a fraction of a second - or it can be disabled completely. This delay can help save your gearbox and drivetrain from wear and tear, but if you don't know it exists you might think something is wrong with your transmitter. See the [[wiki:opconfig:tabs:driving#driving_delays|Driving tab]] in OP Config to adjust this setting. 
  
 ==== Turning ==== ==== Turning ====
wiki/tcb/operation/driving.txt ยท Last modified: 2021/04/15 18:41 by opadmin