Differences
This shows you the differences between two versions of the page.
Both sides previous revision Previous revision Next revision | Previous revision | ||
wiki:opconfig:tabs:driving [2020/01/27 18:31] opadmin [Track Recoil] |
wiki:opconfig:tabs:driving [2023/06/04 17:26] (current) opadmin [Driving Delays] |
||
---|---|---|---|
Line 66: | Line 66: | ||
== Transmission Engage Delay == | == Transmission Engage Delay == | ||
{{ wiki: | {{ wiki: | ||
- | This delay is the length of time from when the engine is first started to when the TCB automatically engages the transmission as a convenience to the user. This delay should be at least as long as your engine startup sound clip, to prevent the vehicle from moving while the startup sound is still playing. Setting is in seconds. | + | This delay is the length of time from when the engine is first started to when the TCB automatically engages the transmission as a convenience to the user. This delay should be at least as long as your engine startup sound clip, to prevent the vehicle from moving while the startup sound is still playing. Setting is in seconds. **Note:** this setting also determines the length of time the **Flicker Lights during Engine Start** effect will last, if that is checked on the [[wiki: |
== Engine On/Off Delay == | == Engine On/Off Delay == | ||
Line 164: | Line 164: | ||
Also remember this option will only be enabled if the selected Vehicle Type on the Motors tab is set to Tank or Halftrack, and only if the Drive Motor type is set to Scout ESC. | Also remember this option will only be enabled if the selected Vehicle Type on the Motors tab is set to Tank or Halftrack, and only if the Drive Motor type is set to Scout ESC. | ||
+ | |||
+ | |||
+ | ===== Onboard Red & Green LEDs for Troubleshooting ===== | ||
+ | |||
+ | {{ wiki: | ||
+ | You can use the onboard Red and Green LEDs to verify that your board is responding properly to your radio. While driving, the Green LED indicates forward movement, the Red reverse movement, and both on at once indicate braking. The LEDs are off when stopped. When performing neutral turns, the Green LED blinks during turns to the right and the Red LED blinks during neutral turns to the left (if neutral turns are enabled). When not driving, a solid Red LED indicates the TCB is not in normal operation mode: either because it is still booting up, or because the user has entered a [[wiki: | ||
+ | |||
+ |