Registration Notice

Due to increased spam, forum registration must be manually approved by a moderator! Please see this post for instructions.

Poll

ist dieses teil Mit O:P: kompatibel

ist es kompatibel
0 (0%)
oder nur mit H.L.
0 (0%)

Total Members Voted: 0

*

Offline kettenpaul

  • 44
    • View Profile
  • Deutschland /Mecklenburg /Vorpommern/kröpelin
CS-TK-SWB Heng Long
« on: March 06, 2023, 02:23:41 PM »
Hallo Panzerfreunde
Das Board habe ich durch zufall im Netz gefunden .
Und die Frage ist es kompatiebel mitO.P.
Auch so zum Beispiel die TK16, bei Heng Long hat sich ganz schön was getan

Kettenpaul

*

Offline kettenpaul

  • 44
    • View Profile
  • Deutschland /Mecklenburg /Vorpommern/kröpelin
Re: CS-TK-SWB Heng Long
« Reply #1 on: March 07, 2023, 01:01:02 PM »
CS-TK-https://de.aliexpress.com/item/1005004924384115.html?spm=a2g0o.detail.1000060.2.1a56428a0xzyoO&gps-id=pcDetailBottomMoreThisSeller&scm=1007.13339.291025.0&scm_id=1007.13339.291025.0&scm-url=1007.13339.291025.0&pvid=86070a97-97ca-4948-b066-63f81b2f79d8&_t=gps-id%3ApcDetailBottomMoreThisSeller%2Cscm-url%3A1007.13339.291025.0%2Cpvid%3A86070a97-97ca-4948-b066-63f81b2f79d8%2Ctpp_buckets%3A668%232846%238108%231977&pdp_ext_f=%7B"sku_id"%3A"12000031037363205"%2C"sceneId"%3A"3339"%7D&pdp_npi=3%40dis%21EUR%2168.95%2157.91%21%21%21%21%21%40211b600a16782147684774604e45ae%2112000031037363205%21rec%21DE%211837893692&gatewayAdapt=glo2deuSWB Heng Long

https://prnt.sc/GkzX1mBH6UHO

*

Offline LukeZ

  • 1241
    • View Profile
  • France
Re: CS-TK-SWB Heng Long
« Reply #2 on: March 07, 2023, 01:22:06 PM »
Hi Paul, that is an interesting device which I did not know about, even though it seems it has been released for several years.

As usual the Chinese documentation leaves something to be desired, but from what I can tell this is a standalone gyro system that operates with standard RC inputs. In that case it should work with the TCB or any other control board that can output servo signals.

These are the connections you would make with the TCB:

Heng Long TK-SWBOpen Panzer TCB
P2-1RC Output 3 (Turret rotation)
P2-4RC Output 4 (Barrel elevation)

In OP Config on the Motors tab, you will want to set both "Turret Rotation" and "Barrel Elevation" to "RC Output."

Then connect a rotation motor and an elevation servo to the TK-SWB, and of course you will have to provide power to that unit also, as shown in the Heng Long diagram.

I can't promise this will work but I think it should. I'd be interested to hear the results of anyone who gives it a try.

CS-TK-SWB.jpg
CS-TK-SWB Heng Long CS-TK-SWB.jpg
Views: 1511
NO SUPPORT THROUGH PM - Read why
Need a forum account? Read here
Open Panzer FAQs