[kettenpaul]

Hallo Panzerfreunde
Das Board habe ich durch zufall im Netz gefunden .
Und die Frage ist es kompatiebel mitO.P.
Auch so zum Beispiel die TK16, bei Heng Long hat sich ganz schön was getan

Kettenpaul

[kettenpaul]

CS-TK-https://de.aliexpress.com/item/1005004924384115.html?spm=a2g0o.detail.1000060.2.1a56428a0xzyoO&gps-id=pcDetailBottomMoreThisSeller&scm=1007.13339.291025.0&scm_id=1007.13339.291025.0&scm-url=1007.13339.291025.0&pvid=86070a97-97ca-4948-b066-63f81b2f79d8&_t=gps-id%3ApcDetailBottomMoreThisSeller%2Cscm-url%3A1007.13339.291025.0%2Cpvid%3A86070a97-97ca-4948-b066-63f81b2f79d8%2Ctpp_buckets%3A668%232846%238108%231977&pdp_ext_f=%7B"sku_id"%3A"12000031037363205"%2C"sceneId"%3A"3339"%7D&pdp_npi=3%40dis%21EUR%2168.95%2157.91%21%21%21%21%21%40211b600a16782147684774604e45ae%2112000031037363205%21rec%21DE%211837893692&gatewayAdapt=glo2deuSWB Heng Long

https://prnt.sc/GkzX1mBH6UHO

[LukeZ]

Hi Paul, that is an interesting device which I did not know about, even though it seems it has been released for several years.

As usual the Chinese documentation leaves something to be desired, but from what I can tell this is a standalone gyro system that operates with standard RC inputs. In that case it should work with the TCB or any other control board that can output servo signals.

These are the connections you would make with the TCB:

Heng Long TK-SWB	Open Panzer TCB
P2-1	RC Output 3 (Turret rotation)
P2-4	RC Output 4 (Barrel elevation)

In OP Config on the Motors tab, you will want to set both "Turret Rotation" and "Barrel Elevation" to "RC Output."

Then connect a rotation motor and an elevation servo to the TK-SWB, and of course you will have to provide power to that unit also, as shown in the Heng Long diagram.

I can't promise this will work but I think it should. I'd be interested to hear the results of anyone who gives it a try.