Registration Notice

Due to increased spam, forum registration must be manually approved by a moderator! Please see this post for instructions.

*

Offline Tom

  • 71
    • View Profile
  • USA
Led Flash TCB and TBS
« on: February 07, 2017, 12:10:01 PM »
I currently have my Taigen recoil running off of the TBS and the barrel flash (which is a simple LED with two leads) plugged into the BARC.
To run the LED into the TCB would the LED light connect to the Flash port or another connector?

*

Offline LukeZ

  • 1241
    • View Profile
  • France
Re: Led Flash TCB and TBS
« Reply #1 on: February 07, 2017, 12:25:11 PM »
The Flash connector on the TCB is really intended for the Taigen high-intensity flash units that require 3 wires. But you could still use a regular LED with it if you make your own 2-wire plug.

The Aux Light output would be easier. It has a wide variety of options including a Flash setting specifically for this purpose.
NO SUPPORT THROUGH PM - Read why
Need a forum account? Read here
Open Panzer FAQs