Open Panzer

Open Panzer Help & Info => Open Panzer Help => Topic started by: Tom on February 07, 2017, 12:10:01 PM

Title: Led Flash TCB and TBS
Post by: Tom on February 07, 2017, 12:10:01 PM

I currently have my Taigen recoil running off of the TBS and the barrel flash (which is a simple LED with two leads) plugged into the BARC.
To run the LED into the TCB would the LED light connect to the Flash port or another connector?

Title: Re: Led Flash TCB and TBS
Post by: LukeZ on February 07, 2017, 12:25:11 PM

The Flash connector on the TCB is really intended for the Taigen high-intensity flash units that require 3 wires. But you could still use a regular LED with it if you make your own 2-wire plug.

The Aux Light output would be easier. It has a wide variety of options including a Flash setting specifically for this purpose.