Registration Notice

Due to increased spam, forum registration must be manually approved by a moderator! Please see this post for instructions.


Offline jhamm

  • 142
  • It´s a hobby no profession!
    • View Profile
  • Germany
First Test...
« on: July 13, 2017, 12:35:53 AM »
Hi there,
Yesterday the boards arrived by UPS.  ;D
Most important cables connected and go...
Here the test set-up:
- Transmitter Turnigy TH9x with AR9x Board and Frsky XJT Moduke
- Reciever Frsky X8R or Quanum FR8 (both work great)
- 2x Brushless 18/50A Sensorless ESC
- 2x HK Track 380 Sensorless Brushless Motor 3200KV
- some Servo

The parameterization of the Controlbaord is very easy.
Connect the Reciever to OPCBoard and and turn on the transmitter => Do not forget to bind the transmitter and receiver before!
Plug USB in OPCBoard - its powered by USB and start up automatically.
Start the Open Config and push "Connect" - If this done push "Read Radio".
Is everything connected and set correctly, this should look like this:

That was the hardest part... :o
Now you can make the settings.
Have Fun!