This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - Rad_Schuhart
Pages: 1 2 3 [4] 5 6 7 ... 9
46
« on: June 24, 2019, 07:14:46 AM »
Puedes subirlo a youtube, o mandarmelo por Whatsapp o Telegram, lo que prefieras.
Lol, yes, those are the options. Juanillor, también me lo puedes mandar por email a Rad_Draven@hotmail.com
47
« on: June 19, 2019, 03:46:13 PM »
Entonces va a ser lo que te hemos dicho. Intenta configurarlo como te ha indicado Luke cuando puedas y nos cuentas.
48
« on: June 19, 2019, 03:11:22 PM »
Leyendo con detenimiento, pienso que debes de estar usando los canales de la emisora equivocados, o los cables de los motores conectados a los ESCs en posición incorrecta.
Cuando le das hacia adelante, el tanque está girando, y cuando le das a girar, el tanque acelera. Echale un vistazo a los canales. Para invertir el orden tienes que hacer lo que te ha puesto Luke ahí arriba. En cuanto a los cables de los motores es tan sencillo como desconectarlos y probar conectarlos de otro modo hasta que des con el funcionamiento correcto.
Al principio creo que tuve un problema parecido usando la placa con motores Tamiya.
49
« on: June 19, 2019, 03:03:22 PM »
Hola Juanillor, puedes hacer un video donde veamos lo que manda tu radio y lo que recibe la TCB cuando está conectada al PC? Tendrías que grabar la pantalla de la radio moviendo el stick de control, y también enfocando a la pantalla del ordenador. Es importante ver qué estás emitiendo y qué está recibiendo la placa.
Puedes subirlo a youtube, o mandarmelo por Whatsapp o Telegram, lo que prefieras.
50
« on: May 31, 2019, 02:42:01 AM »
Hi Legrosminet... If you are very very stuck, you can always can send the hardware to me. The radio, receivers, the open panzer board and the ESCs. It should not take me more than a day to sort it out. Just cover the shipping both ways and done, I dont want any extra Euro. France-Austria should not be toooo expensive. Regarding your er9x problem not binding. Are you sure you are selecting the correct protocol in the menu? Also, how are you binding, pressing the button in the module, or selecting bind in the radio? In other order of things, your module should work, but instead of the Frsky module that Luke recommends, Id go for a multiprotocol module https://www.banggood.com/IRangeX-IRX4-2_4G-CC2500-NRF24L01-A7105-CTRF6936-4-IN-1-Multiprotocol-STM32-TX-Module-With-Case-p-1197130.html?rmmds=search&cur_warehouse=CNI use two of them and work good with most of the brands.
51
« on: May 29, 2019, 04:34:44 PM »
Oh I missed that part completelly! When you said "original firmware" I imagined it was the original er9x from www.er9x.com but not the original firmware that comes with the radio! I strongly recommend you to flash er9x and never use the stock firmware again.
52
« on: May 29, 2019, 03:30:38 AM »
Bonsoir Rad_Schuhart,
Good evening Rad_Schuhart,
could you send me your parameter file, I just flashed my radio with the er9x firmware
cordially
legrosminet
Bonjour Minet, I am sorry but my 9x radio has been moded quite a lot, to the point that does not use er9x anymore, but erskyTX, which is an upgraded version of er9x. That needs a big hardware mod with a board that does not exist anymore... So it means my radio file wont work with your radio. But If you have already flashed the newest version of er9x, and created a new model, I think you should not have any problem anymore. As luke points, be sure to calibrate it. Regarding your binding problem, I have no experience with that receiver, but you might need to select the receiver you have in the "Model setup - protocol" menu.
53
« on: May 28, 2019, 03:50:07 PM »
I agree with Luke, and even more: Nobody should use Tanker9x anymore.
It has been abandoned for years and as far as I remember it included some mixings and some inertias. I am pretty sure problems are comming from there.
Id just flash the latest version of er9x and create a new model in the radio.
54
« on: May 28, 2019, 02:25:33 PM »
I am sorry that hasn't been fixed. You might want to follow along with the other thread and try the suggestions there to see if they help you. The other user is French, you are Spanish and I am English so it is kind of crazy but hopefully with Google translate we can all understand each other!
Turn and Forward Problem
There is also me! Juanillor is from my city, so If I am needed for translating just shout!
55
« on: May 28, 2019, 02:23:11 PM »
Thanks! I am pretty proud of that PIV. Shame in the photo one wheel is out of its place. I noticed after taking the photos, damn, lol. It was a 2 seconds fix.
Regarding the bug, dont worry too much, I was just reporting in, lol.
56
« on: May 28, 2019, 03:37:10 AM »
Hi Luke, this weekend I had a small rc event, and after some extensive use I discovered a small glitch. If you shoot the machine gun, and then you switch it off, if you switch it on again while the mg_stop.wav is playing, the machine gun will flash but with no sound at all. If you switch it off while flashing with no sound, it wont play the stop sound neither. This happens with the first and with the second machine gun. The machine gun stop sounds I use are longer than most of what people will use, but hey, the issue is there. Nothing serious, but I dont know, you might want to fix it. I rocked with my tanks, and people loved the music and voices by the way  :D:D Hope the TCB will be available again soon! 
57
« on: May 28, 2019, 03:28:47 AM »
So I think I wont upload more voices or extra sounds until somebody requests them. Please tell me when (or if) the sounds are uploaded (sherman sounds too), so I can remove them from my one drive account
Hi, i downloaded the german voices, would you please make the Sherman sounds available too? I really would like to use these!
*nevermind, i see that the sound sets are uploaded to Github... Thank you for sharing!
Hi, I have literally hundreds of more american german and russian voices. I could upload them too. I am glad somebody likes them too!
58
« on: May 23, 2019, 01:56:50 PM »
Hi, I have modified my TCB setup a little bit.
The cheap two small ESCs worked well, but with some issues. Perfectly from medium to full throttle, but not so good when driving at the slower speeds. One motor seemed to work faster than the other, and it was very very noticeable when driving at crawling speeds. The slower the speed, the more noticeable it was.
So I decided to give another try to the bangood dual motor controller, and I replaced the small two ESCs and fitted the DMD between the TCB and the soundboard. The 16 receiver is there too.
I have been driving like an hour or so, and I did not notice any heat, so it looks to be safe. Also no signal loss, but of course the tanks are always near you, is not like you are doing long distance FPV flying...
After installing them, the problem of one motor going faster than the other was gone. The super low speed is not the best feature of this DMD, but it is a little better than with the mini ESCs.
And warning! For those that wont read the Wiki, dont forget to remove the red wire from the DMD!
59
« on: May 18, 2019, 03:54:01 AM »
Hi. I did not check the sound quality of those voice packs I uploaded. I think you can uploaded them to github like that, and if somebody wants to use the sounds, they can convert it to the required format themselves. Converting all of them is a pain, and maybe you are right and nobody is going to use them...
So I think I wont upload more voices or extra sounds until somebody requests them. Please tell me when (or if) the sounds are uploaded (sherman sounds too), so I can remove them from my one drive account
60
« on: May 18, 2019, 03:49:56 AM »
Hi again. I just uploaded a newer version, and I think it can be the definitive one. I corrected the machine gun glitches, I created two new idling motor sounds, and also I added a damaged idle sound. Due to the github restriction, I had to split the file in two. I know the sounds could be better, but I honestly thing I did OK sounds and some people might be happy enough with them. Anyway if somebody has a better idea or wants to improve anything, just tell me, or just modify them at your will  EDIT: I just uploaded another file with "cannonh" that I forgot to add. Lol, you all should see my desktop with the folders. "Final sounds" "Final sounds 2.0" "Final sounds 3.0" "Definitive final sounds" "ULTIMATE SOUNDS" "Em... well, just the last version of sounds". Is more or less like that, lol. But now it should be ok... At least for the next five minutes.
Pages: 1 2 3 [4] 5 6 7 ... 9
|
Show Posts