91

Open Panzer Help / Re: IR battle (Tamiya Spec)

« on: December 23, 2017, 01:05:58 PM »

Hi,
use transmission with stronger motors

92

Open Source Sound Dev / Re: Open Source Sound using Teensy 3.2 and PJRC Audio Library

« on: December 23, 2017, 03:46:08 AM »

The problem is in most cases outside the tank.... 

Merry Christmas @ all!

93

Open Source Sound Dev / Re: Open Source Sound using Teensy 3.2 and PJRC Audio Library

« on: December 22, 2017, 10:15:02 AM »

Do you have enough ammunition on board?   

94

Open Panzer Help / Re: How to use all switches & pots on Turnigy 9x radio

« on: December 19, 2017, 02:54:41 PM »

Hi Rad,
you need Firmware V1.1.6
My Module is V1.1.5 and could not bind with X8R!
Try all things what possible -different Firmware with and without LBT - no chance.
Have actual no time for modify the Module with soldering in pins for Firmwareupgrade....

95

Open Panzer Help / Re: How to use all switches & pots on Turnigy 9x radio

« on: December 19, 2017, 09:45:08 AM »

Hi Rad,
the second link is the same as the first =>Multiprotocol-Module

96

Open Panzer Help / Re: Sound tbs mini sticks radiolink9

« on: December 12, 2017, 03:19:29 PM »

Hi Luke,
look at Picture No.3 
it´s LeoII 12.tbs file.
All Files from Thomas have it´s own order...

@juanillor
what the problem?
you can play the sound by push the play button.
Listen to the Sound and sort in the right place at the Parameter Tab.
Please take a look at the wiki:
http://openpanzer.org/wiki/doku.php?id=wiki:tcb:tcbinstall:sound_benedini_v3

97

Open Panzer Help / Re: Sound tbs mini sticks radiolink9

« on: December 12, 2017, 01:37:44 PM »

Hi,
the assignment of the sounds to the coder is not correct.
The order of Sounds in the original Benedini-Soundsets match not the order for TCB like this:

98

Open Panzer Help / Re: How to use all switches & pots on Turnigy 9x radio

« on: December 04, 2017, 04:00:31 AM »

Hey Luke,
let us split some Hair:
My comment is related to the actual Turnigy 9x......   

In my Th9x is the AR9x board, with XJT Module and Taranis Hall Effect Gimbals.
I use this Radio only for testing and my Wife for her Panzer III.
For my Collection of Panthers and the Jagdtiger i use a Tranis X9D+ Special or my very new X9E. 

99

Open Panzer Help / Re: How to use all switches & pots on Turnigy 9x radio

« on: December 04, 2017, 12:26:50 AM »

Hello,
The Turnigy 9x can be used out of the box with the TCB, ELMOD, Clark and all other availaible control boards.
The output functions must be assigned in the menu Model - that's all.

The Turnigy 9x is the most modded transmitter i know, look at here:
https://www.rcgroups.com/forums/showthread.php?1616229-9X-FlySky-iMax-Turnigy-Eurgle-FOR-DUMMIES

100

TCB Dev / BEC 5V Power of TCB

« on: November 10, 2017, 04:27:57 AM »

Hi Luke,
the TCB have a builtin BEC Power
How much Current did this BEC provide?
In my Jagdtiger is a recoil-servo in normal size with 8kg Force installed
this servo allone draws more than 2 A current....

101

Open Source Sound Dev / Re: Open Source Sound using Teensy 3.2 and PJRC Audio Library

« on: November 10, 2017, 12:32:04 AM »

Hi Luke,
if possible
- all connectors at one side

102

Open Source Sound Dev / Re: Open Source Sound using Teensy 3.2 and PJRC Audio Library

« on: November 08, 2017, 08:13:24 AM »

It would be better if you used a 4-ohm speaker, you would achieve twice the wattage. However yes, you can also add an external amplifier (connect it to the LINE OUT header). Then you can have as much power as you want but of course it is not an ideal solution.

an external amplifier is now the easiest way to fix the loudness...

I have considered designing a new board with a more powerful amplifier. I don't know when I will have time, but if volume will be a limit then it would be better to make a new design now rather than to promote a product that will be disappointing.

on the desk it was really loud .... 50% volume was enough.
But built into the model, it is too quiet ...
that may be because of it the sound goes upwards out of the tank
and the hull is build of Aluminium....
there come some causes together

103

Open Source Sound Dev / Re: Benedini Micro & Openpanzer

« on: November 08, 2017, 12:47:37 AM »

Luke,
you are rich on knowledge.
This is worth more than money! 

104

Open Source Sound Dev / Re: Open Source Sound using Teensy 3.2 and PJRC Audio Library

« on: November 08, 2017, 12:45:19 AM »

Jürgen I'm curious, what is your thought about the volume level of the sound card? Do you think it is loud enough for 1/16 scale operations?

I am using a Visaton FRS7-4 which is a 2.5" diameter, 4-ohm speaker. I don't have it in an enclosure, which would probably help. It seems pretty loud to me but I do all my testing on my desk rather than outside in an actual model, so that is not a good test in real conditions.

I am going to order the FRS8-4 (3.3" diameter) to see if the larger size makes any difference or not...

Hi Luke,
now i did a step forward....
I have not compared the Open Source Sound Device (OSSD) with other Sound Devices yet

Last weekend i fit the OSSD in the Aeromate Panther II, the FR8JS 8Ohm Speaker is located in under the "Motordeck":


Volume is full up - right next to the panther it is loud enough
5 m further away, it is already quiet ..... an 10m away it is very quiet.
The Benedini TBS is much loder......
I a Amplifier a Solution?

105

Open Panzer Help / Re: MOSFETs

« on: November 08, 2017, 12:23:19 AM »

Hi Luke,

HobbyKing EU Warehouse = Rozenburg Netherlands