Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - osika

Pages: 1 2 [3] 4
31
Open Panzer Help / Re: New Board / visual check
« on: October 20, 2020, 06:46:28 PM »
All the MOSFET'S have GFDMR written on them.

32
Open Panzer Help / Re: New Board / visual check
« on: October 19, 2020, 09:56:46 PM »
Okay thanks Luke. Hopefully all that will work but worst case the flash and servo recoil is what I really need and the rest
is nice but I can do without. Will let you know how the incoming boards function.

33
Open Panzer Help / Re: New Board / visual check
« on: October 19, 2020, 06:33:27 PM »
Does cannon flash work with defective boards? Or another way.. is what does not work with faulty HK boards?

34
Open Panzer Help / Re: New Board / visual check
« on: October 18, 2020, 10:18:55 PM »
Hi Luke,

Thanks! The seller  is going to look and test it board.

I was intending to buy one..waited until the kinks were all worked out
then found HK stopped making them..but I have so far found 3 for sale and feel fortunate to have been able to!
It is truly a great product and as much as the actual board is the wiki that goes along with it.

35
Open Panzer Help / Re: New Board / visual check
« on: October 16, 2020, 03:46:23 PM »
I just found it was one of the last of the HK boards made..so should be fine!
Glad I was able to acquire another board :))

36
Open Panzer Help / New Board / visual check
« on: October 16, 2020, 03:06:00 PM »
I can't quite recall where the photo of what to look for in the proper board soldering is.
Does this board look correct? Brand new and I have the opportunity to buy it so just
checking if all looks good. Thanks..

37
TCB Dev / Re: Gear Shift
« on: October 16, 2020, 07:41:48 AM »
Hey Luke..thanks! Yes the transmission engage and breaking and things like nudge etc are great. Adding gear shifts
would be nice but imo you have 99% here already! Again just reading about all the systems out there..TCB is to me
the most flexible, effective and easy to use. :)   

38
TCB Dev / Gear Shift
« on: October 15, 2020, 07:00:34 PM »
Curious how difficult it would be to add a gear shift option? Perhaps 3-4 "shifts" at adjustable percent speeds.

39
Open Panzer Help / Re: Servo Recoil
« on: October 15, 2020, 11:34:07 AM »
Great thanks Luke :)

40
Open Panzer Help / Servo Recoil
« on: October 12, 2020, 03:25:59 PM »
I have ordered a servo and elevation recoil unit to use and just tested recoil using another servo I had using the output for gun fire.
It works each time with recoil set on cannon fire which is great. (Have not tried setting to mechanical
trigger or see need to?) One thing though and not a big deal..upon turning power on... Servo does some fast movements then upon triggering
cannon does the proper fast/slow recoil return movement. I have not adjusted end points or anything yet.

41
Open Panzer Help / Re: RC on off switch
« on: October 08, 2020, 07:56:47 AM »
Thanks Luke :)

42
Open Panzer Help / Re: RC on off switch
« on: October 07, 2020, 07:50:30 PM »
Hi Luke,

If I set Input out put A to "external"

External Output A-toggle
Trigger to switch 2
Pos. 1

Would that work to trigger the on/off function on this device (RC Remote Controlled AUX on/Off Electronic Switch Relay)
plugged into GP I/O-A pins?

Sorry for the confusion still trying to get all of this down..





43
Open Panzer Help / RC on off switch
« on: October 07, 2020, 04:39:29 PM »
Looking to use a rc switch RC (Remote Controlled AUX on/Off Electronic Switch Relay for Car Truck Boat LED Light Drone (8A)
I think maybe two ways to control this..but the IO output is best? What would it be set to in functions/triggers?
Going to use it to turn power on/off to the heating element which I boosted voltage a bit to. Using Smoker
switch for fan only.





https://www.amazon.com/gp/product/B08FLVGTXQ/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1

44
Open Panzer Help / Re: Recoil questions using TBS
« on: October 07, 2020, 04:32:40 PM »
Thank you. Looking forward to hooking up servo and elevation unit I just ordered. Again looking at all the boards out there..Elmod, Beier etc etc.
this to me is hands down the best unit both in terms of functions and also in terms of explaining everything via the wiki.  I really hope you guys
find a producer again for sure!


45
Open Panzer Help / Re: Recoil questions using TBS
« on: October 04, 2020, 02:31:35 PM »
TCB SETTINGS

(Have turret on  user sound trigger atm.. not using turret sound as trying to figure out
with TBS if dynamic or normal settings to work properly)

Pages: 1 2 [3] 4