This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - Deny
1
« on: August 28, 2019, 02:33:29 PM »
Hi! Writing kv-1
2
« on: July 20, 2018, 02:52:46 AM »
Well photo change the smoke machine P.s. Luke, good day. For this forum there is a good mod Post_and_PM_Inline_Attachments_v6.13, it allows you to insert an image into the message body. A very handy thing. Here is the link http://custom.simplemachines.org/mods/index.php?mod=3770 regards, Denis
3
« on: July 20, 2018, 02:29:24 AM »
Now about experiments. Now I have to control the gearboxes are speed controllers HobbyKing XCar 45A, but while I was waiting for them, gathered on Arduino and monster shield control gear and loaded the sketch from the Hatch, came cheap and efficient system.
IR Receivers installed in the viewing slots. For light indication of the hit, I used the led ring, with the help of Arduino Pro mini made friends led ring with TCB Board . To have more space modified smoke machine, this was removed and the motor piston, and left only the chamber to which the valve is attached. It's not bad, it's working.
5
« on: June 02, 2018, 02:21:53 PM »
Luke, thank you so much. Only a complete reinstall of Op Config helped
6
« on: June 02, 2018, 12:39:26 PM »
Hi, Luke!
After the op config is updated, the system displays an error. cannot find the libusb0 file.dll. The OP Config permutation does not help. What are the options?
7
« on: December 23, 2017, 02:33:34 PM »
Спасибо за ответ. буду экспериментировать
8
« on: December 23, 2017, 01:31:04 PM »
Hi,
use transmission with stronger motors
I thought about it, it's a way out. But most people passionate about our hobby have exactly such a set. Maybe there's another solution?
9
« on: December 23, 2017, 10:52:26 AM »
So, I have a tank. Gearbox Taigen 4:1, controlled by speed regulators HobbyKing Xcar 45A. Heavy Tank class Now the question. According to the Tamiya specification, after the first infrared hit the speed is reduced by 50%, after the fifth hit there is a decrease in speed by 25%. So after reducing the speed to 25% tank practically does not move, I can not even turn and it is on a flat surface. Thus it turns out that already after the fifth hit the tank can only shoot, but can not move. Are there any options to solve this problem? 
10
« on: December 23, 2017, 07:18:53 AM »
The problem is in most cases outside the tank.... 
Merry Christmas @ all!
straight to the point. Merry Christmas @ all!
11
« on: December 23, 2017, 02:56:20 AM »
Hi, Luke.
the problem was in the dipswitch. when switching to different modes (easy, medium, hard) the tank remained the custom mode. should have been stronger to move the switches to the edge. Now it is ok.
Regards, Denis
12
« on: December 22, 2017, 11:07:26 AM »
Full ammunition )))
13
« on: December 22, 2017, 09:21:34 AM »
Hi, Luke!
After the next update TCB V. 0.92.15 stopped playing on the sound module of the file reloaded. wav, all other files are working properly.
Sincerely, Denis
14
« on: December 21, 2017, 02:02:34 AM »
Hi, Luke.
Got another Board TCB, came also from the Netherlands, are correct MOSFETs and soldered factory method. All very neatly done.
Regards, Denis
15
« on: November 25, 2017, 01:59:50 PM »
Hi, Luke.
This is great news.
Will try to test.
Thanks for the quick feedback on the idea.
|
Show Posts