This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - Tom
1
« on: April 25, 2017, 09:06:08 AM »
Benedini TBS Mini all set up. A few things.. check the bugs and fixes in the new manual... all sound files must be 8 bit now and make sure to follow the set up procedure on this site to coordinate the TCB with the Benedini! The basic set up is very close to the old system but with some nice changes. I did notice when listening to the the test sound sample, the words "Benedini sounds" plays over them but this does not happen when playing the final sounds via the Mini . I discussed this and a few other thing with Thomas B. as he is interested in hearing about any issues or views on the new 3.0 version. He is not only a professional but also a true gentleman!
2
« on: April 21, 2017, 01:46:55 PM »
Thomas just informed me that everything has to be in 8 bit. Which Audacity can do.
"Audicity should have a option somewhere to save a sound with 22kHz, 8Bit, Mono, WAV format.
Did you check the web already for this? This must be to integrate the sound in a TBS sound file."
3
« on: April 19, 2017, 02:09:44 PM »
I have contacted Thomas about it. Also sorry about the TCB misspelling I am dyslexic end up turning those letters around at times. Probably because of spelling TBS Benedini lol
4
« on: April 19, 2017, 09:46:00 AM »
Yes I read that. I just wanted to point out that when I loaded a 16 bit sound file there was a pop up that said
"Sound format error! Sound must be 22,050 kHz, 8 Bit, Mono WAV Sound is 22,050 kHz, 16 Bit Mono"
So as an FYI if anybody now or every needed to convert to 8 Bit using Audacity; how to do it.
5
« on: April 19, 2017, 07:52:00 AM »
Haven't downloaded any new sound files yet with 3.0 flash version of Benedini but it now says 8 bit file
needed. (was using 16 bit wav sounds before) not sure if this has anything to do with the setting
that was downloaded to sync with the TBC or just part of 3.0? For those using Audacity you can convert
to 8 bit by selecting "Other uncompressed files" as the file type in the export dialog then click the "options"
button, and select "WAV (Microsoft) as the header and "Unsigned 8 bit PCM" as the "encoding".
6
« on: April 18, 2017, 09:42:37 PM »
Okay got it all set..thanks Luke 
7
« on: April 18, 2017, 08:44:41 PM »
After saving and extracting the file I have the yellow file
folder on my desktop then when I click and open it
it shows
data cab archive
install Windows Installer
insMsi Application
InsMsiW Application
setup Application
setup Configuration setting
Then run set setup.exc (second to last one on the list) and it says finished downloading but can't find or sure what do to actually
open or run the program. My guess is "I" am missing or doing something wrong here.
Will ask Thomas as well.
8
« on: April 18, 2017, 07:17:53 PM »
Flash 3.0
9
« on: April 18, 2017, 05:15:45 PM »
For some reason I am having trouble opening the and running the new version?
Working okay for everybody?
10
« on: April 17, 2017, 03:33:47 PM »
Thomas just clarified that one..yes engine pitch drops down when actual load is on motors. Very nice
11
« on: April 16, 2017, 06:37:24 PM »
To clarify..does the load sensor drop the engine sound a bit lower in pitch when the motors are under
an actual load..as in climbing a hill etc? ( I believe that is one of the features of the El Mod)
12
« on: April 15, 2017, 10:14:52 PM »
Just saw this update on the website.
I like the Load sensor right off the bat.
TBS Flash 3.0
New TBS Mini features:
1. Sensor input:
- Speed sensor:
Adaption of engine rpm to real model speed
f.e. pitoto tube sensor in aircrafts
- Load sensor:
Adaption of engine rpm to real model load
f.e. current sensor in vehicles
2. New servo functions:
- Gun recoil
- Control of retractable landing gears in planes (Doorsequencer)
3. New airplane light functions (ACL beacon):
Configurable 3x, 2x and 1x flasher
13
« on: April 14, 2017, 01:10:38 AM »
Note from Thomas..it looks like the TBS mini update may be this weekend Hello Thomas, Update will be posted on the website. I hope to finish the update this weekend. Sorry for the long time you had to wait. I want to wish you happy Easter days and best regards Thomas
14
« on: March 25, 2017, 02:35:59 PM »
The Scout when released will be 2 x 10 amps per motor correct? Though I will test the 2 x 5 Saber in my heaviest tank at
first to see how it performs etc.
15
« on: March 23, 2017, 01:03:44 PM »
Thomas just said he expects it to be released in 4 weeks from now.
|
Show Posts