1

Open Panzer Help / Re: Air soft setup

« on: October 22, 2017, 04:55:30 PM »

Yes it appears all of the MOSFETs have the same 23eg.

2

Open Panzer Help / Re: Air soft setup

« on: October 22, 2017, 04:53:15 PM »

MOSFET is signed 23eg which seems to be the same issue that were on the original boards.  This is a bit disheartening considering these are the new batch that HK has on their website.  I will take a look and see if the other mosfet’s are tagged the same.

3

Open Panzer Help / Air soft setup

« on: October 22, 2017, 02:07:27 PM »

I am attempting to setup a taigen airsoft firing mechanism.  I have rewired the unit as the instructions stated and have it plugged into the recoil port on the tcb.  I have followed the instructions on setting up my radio and set the barrel type to Airsoft.  The default cannon fire function has been deleted and replaced with a new cannon fire function where I assigned the trigger to Aux channel 1 position 1 which is a two way switch.  When I test this the firing mechanism it continues to fire one shot after another and will not stop.  The firing mechanism does not seem to respond to any command from the radio.  Any ideas?

4

Open Panzer Help / Re: hobbyking/Heng long airsoft with no limit switch

« on: October 18, 2017, 08:00:46 PM »

Thanks for your help!  That is what I was afraid of.  Hey and $10 is better then the time that I have spent trying to get this to work.

5

Open Panzer Help / hobbyking/Heng long airsoft with no limit switch

« on: October 18, 2017, 07:24:49 PM »

I have been working on getting the airsoft firing mechanism to work with the tcb.  I have seen the videos but they are no help.  The firing mechanism does not have a limit switch.  The original system worked on just two wires.  Any help would be appreciated.