1
Open Panzer Help / Re: OP Panel size
« on: January 15, 2024, 12:32:13 PM »
Thanks, Yes I will put updates up. Just finding time to fit everything in

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1] 2
1
Open Panzer Help / Re: OP Panel size« on: January 15, 2024, 12:32:13 PM »
Thanks, Yes I will put updates up. Just finding time to fit everything in
![]() 2
Open Panzer Help / Re: OP Panel size« on: January 12, 2024, 05:45:14 AM »
It wouldn't normally be a problem, but have just built 3 TCBs from scratch. Have got them flashed ok, but need to do some testing on them. So need to look at all the menus. I was lucky with parts as I actually purchased alot of the parts years ago before the all vanished and have only just had time to get them done. They all connect and communicate ok so that's a good start.
Thanks Steve 3
Open Panzer Help / Re: OP Panel size« on: January 11, 2024, 07:19:05 AM »
Worked great.
Thanks Steve 4
Open Panzer Help / Re: OP Panel size« on: January 11, 2024, 07:11:10 AM »
Thanks, will give it a go.
Thanks for the help Steve 5
Open Panzer Help / OP Panel size« on: January 11, 2024, 04:59:06 AM »
Is there a way to show all the information in the OP screen. there seems to be parts cut off and if I go full screen it make no difference to the OP panel.
Thanks Steve 6
TCB Dev / Re: Sabretoth esc with arduino Mega« on: November 27, 2023, 08:03:14 AM »
Thanks, that great
![]() 7
TCB Dev / Sabretoth esc with arduino Mega« on: November 27, 2023, 04:27:31 AM »
Hi,
Can see some post with the mega board and the sabretooth esc, do you have to use the sabretooth esc or can you use the normal esc. If you have to use the sabretooth esc which model board is the best option. 8
Open Panzer Help / Re: Obsolete part« on: May 18, 2022, 12:48:25 AM »
Hi,
Thanks for the help. Will be glad to get them finished so I can fit into my models. Steve 9
Open Panzer Help / Obsolete part« on: May 17, 2022, 06:31:15 AM »
Hi,
Does anyone know if there is a replacement part for the below. Its the last part I need to complete my PCBs. C14 S 5.3x5.3 mm (0.209") Panasonic - ECG CAP ALUM 10UF 35V 20% SMD EEE-1VA100SR Thanks Steve 10
Open Panzer Help / Re: Obsolete part« on: January 18, 2022, 08:00:24 AM »
Hi,
Thanks for the information, will keep looking. its a nightmare for parts at the moment, am only short of about 6 parts now but its taken months to try and sort parts. Thanks again(am in the UK) Steve 11
Open Panzer Help / Obsolete part« on: January 17, 2022, 09:32:48 AM »
Hi,
Is there a alternative par for 743C08315JP Res ARRAY 150 OHM 4 RES 2008 please. Thanks Steve 12
Open Panzer Help / Re: Scout ESC« on: January 04, 2022, 07:27:46 AM »
Hi,
Thanks for that, sorry for the late reply have been in hospital. Steve 13
Open Panzer Help / Scout ESC« on: December 03, 2021, 03:19:51 AM »
Hi,
Does anyone have any photos of a completed working Scout board, am having trouble matching BOMs to drawings and schematics. Thanks in advance for any help. Steve 14
TCB Dev / Re: ATMEGA2560-16AU Alternative« on: October 25, 2021, 08:34:30 AM »
Hi Luke,
Thanks for the response, i thought that might be the case. I may take a chance and get hold of a couple from China and hope for the best. thanks Steve 15
TCB Dev / ATMEGA2560-16AU Alternative« on: October 25, 2021, 04:27:01 AM »
Hi,
Am struggling to get this chip, seems in very short supply ATMEGA2560-16AU is there any alternatives i can use, i can get on back order but its months away. Thanks Steve
Pages: [1] 2
|