This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - Brian Tulk
Pages: [1]
1
« on: November 04, 2020, 04:17:00 AM »
hello, Luke, Brian from south aus here ,i too keep an eye on the op website but dont post, i have one of the last ones from hk in aus, iwill be fitting it to my crusader iam scratch building and will post when i am further along, slow going.Thank you for all your help when i was setting up my chally2, its still going great and is run at least 3 times a week,very reliable love it, cheers to all regards Brian
2
« on: May 26, 2019, 01:59:10 AM »
Just learnt how to attach pictures, here are a few of the initial TCB setup.
3
« on: February 27, 2019, 06:09:46 AM »
hello all ,brian from south aus here, today 27th feb received tcb from aus warehouse, got it for 1/2 price , seems they are going out of production ,havent tested it yet,but it does not have the gr23 mosfets . hope they have lots in stock for everyone, good luck with your orders.
4
« on: February 27, 2019, 05:55:52 AM »
hello all ,brian from south aus here ,regarding tcb availability ,i have today 27th feb received a tcb from aus warehouse for 1/2 price less shipping of course .havent tested it yet but doesnt have 23eg printed on suspect mosfets.Thought i'd grab it as i see they seem to be going out of production.Luke any chance of that wiring diagram for 'turret lock" set up have all the bits as recomended, just need some assistance not to wreck board, thanks ,brian
5
« on: January 09, 2019, 04:16:39 AM »
hello,johnnyvd and luke, brian from south oz here, did you fit the turret lock set up? i have got in the bits and would like to give it a try, a wiring diagram would be a great help if you could post one, all is going very well with my tcb set up,very pleased, very reliable, cheers thanks in advance, regards brian
6
« on: July 09, 2018, 06:09:15 AM »
Ok, thanks Luke , got my pad and paper and making notes ready for the next round with tcb, its an interesting way of learning new things ,that being said also a constant reminder to check whats done as opposed to what should have been done, like revisiting the "functions list" which i did prior to buying tcb, but not before installing it the second time around. Oh well live and learn, will surely be more questions as i go thanks for your patience and prompt responses, regards Brian.
7
« on: July 07, 2018, 05:33:43 PM »
Hi Luke, ok sorry about the rambling message, the sound problem seems to have sorted itself, i don't know but it was doing it on my test setup, with no motors connected,maby too much power from lipo ? To answer the Radio problem, that goes to the op set up, there are only 8 channels available upon setup in radio, of these number 7 i think is a
pot analog that doesn't come up when assigning functions.Luke don't worry about it at all , i am happy with it.Would like leopard 2 sonds tho,will post some pics of setting up soon and a video (when i work out how!) Thanks again, regards Brian
8
« on: July 06, 2018, 08:16:44 AM »
hello all, i have finally gathered all the various parts required to finalise my TCB install. This includes sabretooth ,taigen[panzer3/4] sound,yeah racing lights,turnigy radio,receiver,double pad metal tracks,all metal turret gearbox,and a fairly steep learning curve for a novice.I have read a lot of other posts on the forum and they have been a help in this adventure, I really understand 'outofmydepth' challenges as i have felt similarly inadequite in trying to sort it all out.Ok so got this far thanks to everyones input,however the sound set up from taigen [thanks to Mark at ozarmour] is a little anemic being only for panzer 3/4 ,as its in a challenger 2, the main issue other than being unable to use all the switches/functions on the turnigy 9x is that the sound cuts out at a seemingly low volume when applying throttle. Did think i had read somewhere o the site about this? The settings on the TCB are at a low level but not sure if this affects the taigen or only other sound cards. Any help would be great.thanks and good luck to all, Brian from south aus.
9
« on: March 22, 2018, 04:36:11 AM »
Does anyone else have a heng long challenger 2 ,would like to see pics of how others have rendered there models, regards to all Brian .ps also any tips about setting up tcb cheers to all
10
« on: March 22, 2018, 01:51:41 AM »
Thanks for your quick reply Luke,will check that on radio itself. Yes challenger has lots of scratch built extras,armour etc, but iz basically all heng Long,its not bad for $180 aus a few years back. I do love these things as you can add to them for next to nothing!! Compared to my 1986vintage King tiger ,that at the time had no spares or options for big dollars! Thanks again regards,brian
11
« on: March 21, 2018, 04:53:31 AM »
Hello all ,i have a question regarding the dead band on my turnigy 9x 9channel recently bought from hk, turret doesnt move until stick is over 1/3 of the way.i may need to rejig but has anyone else found this issue on first set up, thanks all regards Brian
12
« on: March 21, 2018, 02:23:01 AM »
Hi luke, a bit new to computers, tried to send a video, trying a photo now 
13
« on: March 11, 2018, 11:20:06 PM »
hello all, i have recently installed tcb+sabretooth into heng long challenger2,also got turnigy 9x 9ch from hk.I have fitted the unit went thru set up and all is ok ,no sound airsoft,or lights as yet,waiting to sort parts req. So far pretty happy with performance,so will see how it all comes out in the end. cheers to all regards Brian.
Pages: [1]
|
Show Posts