Open Panzer
Open Panzer Help & Info => Open Panzer Help => Topic started by: Springman65 on April 30, 2017, 10:33:02 AM
-
Would the Flash Port of the TCB be capable of driving 2 or 3 Taigen high-intensity flash units in parallel at the same time? This would be used in a 1/16th scale Torro Sturmtiger, to intensify the flash effect.
Thanks,
Springman
-
I have not tested that but it shouldn't be a problem. The flash units are not particularly high current devices by their nature.
-
I have not tested that but it shouldn't be a problem. The flash units are not particularly high current devices by their nature.
OK, I guess that will be on my ToDo list to try. But, maybe I Will try a quad (4) setup as the barrel seems to have the room for them....😬
If it could do 4 in parallel, I would consider ganging them for larger scales......
Thanks Luke!
Springman
-
Four in parallel should no be a problem. Another thing to test might be to try multiple flash bulbs powered by a single Taigen unit. I'm not sure if that would work or not but worth a try if it would save you stuffing 4 flash units in your model. You could test that now even without the TCB.
-
Four in parallel should no be a problem. Another thing to test might be to try multiple flash bulbs powered by a single Taigen unit. I'm not sure if that would work or not but worth a try if it would save you stuffing 4 flash units in your model. You could test that now even without the TCB.
Luke,
I ordered the Torro Sturmtiger yesterday, with 4 additional flash units. So, I will be ready to bench test them shortly. While knowing if the TCB can handle ganged flash units may not be useful to man in 1/16th scale, it may be to larger scales....
Springman