Open Panzer
Open Panzer Help & Info => Open Panzer Help => Topic started by: Amaral on May 06, 2022, 03:00:27 PM
-
Hi.
I have problem with my OP tcb in my Maus. It drives only backwards and neutral turn is possible only in left direction. If I want to go forward there is no acceleration sound. Moving backwards and neutral left turn arent proportional. Always full throttle. Position of stick doesnt matter.
When I plug tcb to pc I can see all stick movements in radio tab.
When snooping, tcb doesnt see driving forward.
Im trying to reflash - still problem.
So I took second op tcb, flashed from same config file and? Same problem!
So it isnt hardware problem?
-
Hi Amaral, the most likely reason is that the channel center and end points were not saved correctly. It's good that you can see the stick movements on the radio tab, but I would recommend you go through the full radio setup procedure again. Refer to the video on this page (https://openpanzer.org/wiki/doku.php?id=wiki:opconfig:tabs:radio).
If that doesn't fix it let me know!
-
Now it works!
Thx Luke for help.
-
Thanks for letting me know! I'm glad it was something simple. :D