1

Open Panzer Help / Re: No brakes

« on: March 03, 2018, 01:23:46 PM »

Thanks for the detailed reply.
It does work, but I like to know why it works and you have explained that.
Many thanks

2

Open Panzer Help / Re: No brakes

« on: March 03, 2018, 05:22:47 AM »

Hi
I have Inertia set at level 4 with no preset, and Momentum also level 4 with no preset.
Both LED’s are on when the stick is in braking position, no brake.
Snoop shows braking.
I am assuming the brake on the ESC has no effect when used through the TCB.
I have got bored of drones and thought I would try robotics, using a track laying base with a mechanical grab/hand on the front, so braking is important, excellent board by the way.

3

Open Panzer Help / Re: No brakes

« on: March 02, 2018, 08:47:32 AM »

Hi Luke
Thanks for the reply, I was aware how the brakes worked, I have found the answer to my problem.
I have put the Change direction delay to zero and know have full braking.
I tried it with .5 seconds and lost the brakes.
Works for me.

4

Open Panzer Help / No brakes

« on: March 01, 2018, 08:23:16 AM »

Hi
Can anybody tell me how to get my brakes working.
I have a tracked vehicle with two nine volt motors linked to two ESC’s, when I test the ESC’s using a Frsky D8R-11 Plus RX In PMW mode I get forward, back and stop.
When linked to the TCB with Frsky D8R- XP RX in PPM mode I get forward and back but no brake.
Any ideas please.