This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - jhamm
Pages: 1 ... 5 6 7 [8] 9 10
106
« on: November 07, 2017, 03:45:36 AM »
The TBS is not too expensive, because it is one of the best sounding devices and worth every penny. The parameterization software is excellent and the TBS is easy to combine with the TCB. Thomas Bendini developed the TBS, had the boards made and programm the Software - that cost a lot of Time and a lot of Money. You have to know, Benedini is a one-man company, since february he only does that part-time because the business does not bring in enough money. The TBS is not open source and that's why Thomas Bendini has the right to protect his development.
Ask Luke, how many time he spend to the TCB-Project....
Just my 2 cent
107
« on: October 20, 2017, 07:28:07 AM »
Hi Eightyeight, all Bords from HK are reworked. There are no new Boards...
108
« on: October 06, 2017, 06:44:50 AM »
Hi Luke, I test with a Tamiya Tiger Speaker and with a Visaton FR8. Both are very loud and I have reduce the volume to 50%. The next File come this Weekend...
109
« on: September 13, 2017, 12:06:43 AM »
Hey Luke, youré right! I do not have defined an analog trigger source..... Sometimes i am so stupid!
110
« on: September 12, 2017, 02:22:38 AM »
Hi Luke, Firmware is now up to date. With teensy.exe is absolute easy... The simultaneous sounds now sound much better. Is the general Volume of the Sound card adjustable by Transmitter? The Function "Set Volume" is greyed out...
111
« on: September 06, 2017, 11:59:56 PM »
Hi Luke, I will try update firmware carefully at the weekend with my new Workstation. Switching the workstation is a huge job and takes a lot of time. I think we have time enough bevore new TCB reach the market
112
« on: August 18, 2017, 02:24:25 PM »
Hi, Track recoil is for the transmission an unusually very high load. For the very simple cheap transmission is not recommendable, so they are very quickly broken... I would not do this with very heavy model tanks too.
113
« on: August 12, 2017, 01:52:50 PM »
Luke, i am impressed On such a simple solution I would not have come!
114
« on: August 05, 2017, 12:37:17 PM »
Hi, cutting the legs is no good idea! Not at all Mosfet is enough space to do this...
115
« on: July 27, 2017, 03:06:07 PM »
I made a Video of my Panther G with TCB. The Open Panzer Project: TCB + Panther G at Proving Ground
116
« on: July 27, 2017, 01:05:10 PM »
Hello Luke, today i do a test with the old setup... Noting - now all work fine! I don´t know what happens.
117
« on: July 26, 2017, 12:42:40 AM »
Hello Luke, These are very good news. I'll try to test this tonight. Yesterday there was no time for the hobby.
A very big thank you!
118
« on: July 25, 2017, 12:11:00 AM »
Hello Luke, At the time when the problem was present, the Turret Stick had only two Functions: - Cannon Top Center - MG Bottom Center There was no possibility to use something wrong. I will setup the TCB at the evening to the old settings and check if the behavior returns.... Better we find such errors now, before the TCB is available in large quantities.
119
« on: July 24, 2017, 02:22:30 PM »
Hi Luke, yes the Tank stop very hard. change the MG to Top Center and second MG to bottom center , when change the cannon trigger to the switch. i have only the actual file....
120
« on: July 24, 2017, 12:52:33 PM »
Hello Luke, i recognize a Strange Behavior when the cannon is fired... In my Panther i use the Taigen mechanical recoil with Taigen high-intensity flash unit Fire the cannon by drive - the tank stuck very hard. Fire the cannon three or four times the motor sound is stopping - all other sounds function to reenable the motor sound i have to reset the TCB.
Cannon Fire by turret function top middle. Auto start engine with trottle.
When i change the Function like the follow picture, all do fine:
Pages: 1 ... 5 6 7 [8] 9 10
|