This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - Deny
16
« on: November 22, 2017, 05:37:00 AM »
Hi, John! You're right, I'm talking about it.
17
« on: November 21, 2017, 01:11:43 PM »
Good afternoon. I'll ask you a question.
Luke, I looked at the table of possible sounds and didn't see the recharge of the gun. I think he'd be useful.
Do not calculate a second to understand whether your tank weapon has been charged or not, but to hear the sound of the recharge and then gently press the gunshot button.
I hope I'm sure of the idea.
Respectfully, Denis
18
« on: November 12, 2017, 01:40:03 PM »
Yes, you are right. The problem was in the selection of the resistance for the led
19
« on: November 12, 2017, 02:50:09 AM »
Hi, Luke.
I using own LEDs.
20
« on: November 11, 2017, 04:58:58 PM »
Luke, thank you so much.
The response is received. The video of the whole thing.
It's just that my led light is not very bright, so it seemed that something wrong
21
« on: November 11, 2017, 01:58:00 PM »
Luke, thank You very much for Your answers.
One answer I got is that the LEDs light up for a while.
But, they should be lit constantly or flashing?
Also I have the led shines very dimly.
Now I'm talking about indication a hit in the tank
22
« on: November 11, 2017, 01:36:08 PM »
Luke, Excuse me for my English.
When you receive a hit, the led dimly flashes for about 3 seconds. so it must be, or control light penetration in the tank looks like something else.
Oh I hope that now clearly expressed idea.
23
« on: November 11, 2017, 01:15:19 PM »
Good news. Thank you
24
« on: November 11, 2017, 05:50:59 AM »
Hi, Luke.
I have two questions.
First. what is the maximum distance calculated IR send.
Second. Checked the contact, I do not understand the display of contact? I used regular led's, do still offer this fact. In contact with the led dimly flickers for about 3 seconds, so it must be?
25
« on: November 09, 2017, 12:52:57 PM »
I think you're wrong .
The MOSFETs on Your Board is correct, but here it seems that they are set to manual, not the factory.
I'm sorry. not correctly translated. Yes, You are right. they are recovered. although I have the factory soldering MOSFETs
waiting for payment from the Netherlands. carefully look at it.
Tell me please, You have two boards so soldering items?
26
« on: November 08, 2017, 01:46:09 AM »
Hi, Luke.
Here is a photo. The store has a selection of warehouses Europe or China.
27
« on: November 07, 2017, 09:54:18 AM »
Hi John. Yes, they took off the price so I could order another Board, it also comes from Europe. Also took the regulators move, all sent from the same warehouse.
28
« on: November 06, 2017, 01:18:26 AM »
Спасибо за подсказку, не заметил что снизу есть вставка фотографий.
Плата мне пришла со склада из Нидерландов.
Thanks for the tip, didn't notice that the bottom is insert photos. Board I came from stock from the Netherlands.
29
« on: November 05, 2017, 06:04:46 PM »
I ordered another one, waiting to send the parcel. Will check again.
And yet how to insert a photo
30
« on: November 05, 2017, 03:29:47 PM »
Good time of day. as I understand it, my Board is also the correct MOSFETs. Board came to me at the end of October Oh, I do not understand as here to insert image ( 
|
Show Posts