91

Open Panzer Help / Re: CS-TK-SWB Heng Long

« Last post by LukeZ on March 07, 2023, 01:22:06 PM »

Hi Paul, that is an interesting device which I did not know about, even though it seems it has been released for several years.

As usual the Chinese documentation leaves something to be desired, but from what I can tell this is a standalone gyro system that operates with standard RC inputs. In that case it should work with the TCB or any other control board that can output servo signals.

These are the connections you would make with the TCB:

Heng Long TK-SWB	Open Panzer TCB
P2-1	RC Output 3 (Turret rotation)
P2-4	RC Output 4 (Barrel elevation)

In OP Config on the Motors tab, you will want to set both "Turret Rotation" and "Barrel Elevation" to "RC Output."

Then connect a rotation motor and an elevation servo to the TK-SWB, and of course you will have to provide power to that unit also, as shown in the Heng Long diagram.

I can't promise this will work but I think it should. I'd be interested to hear the results of anyone who gives it a try.

92

Open Panzer Help / Re: CS-TK-SWB Heng Long

« Last post by kettenpaul on March 07, 2023, 01:01:02 PM »

CS-TK-https://de.aliexpress.com/item/1005004924384115.html?spm=a2g0o.detail.1000060.2.1a56428a0xzyoO&gps-id=pcDetailBottomMoreThisSeller&scm=1007.13339.291025.0&scm_id=1007.13339.291025.0&scm-url=1007.13339.291025.0&pvid=86070a97-97ca-4948-b066-63f81b2f79d8&_t=gps-id%3ApcDetailBottomMoreThisSeller%2Cscm-url%3A1007.13339.291025.0%2Cpvid%3A86070a97-97ca-4948-b066-63f81b2f79d8%2Ctpp_buckets%3A668%232846%238108%231977&pdp_ext_f=%7B"sku_id"%3A"12000031037363205"%2C"sceneId"%3A"3339"%7D&pdp_npi=3%40dis%21EUR%2168.95%2157.91%21%21%21%21%21%40211b600a16782147684774604e45ae%2112000031037363205%21rec%21DE%211837893692&gatewayAdapt=glo2deuSWB Heng Long

https://prnt.sc/GkzX1mBH6UHO

93

Open Panzer Help / CS-TK-SWB Heng Long

« Last post by kettenpaul on March 06, 2023, 02:23:41 PM »

Hallo Panzerfreunde
Das Board habe ich durch zufall im Netz gefunden .
Und die Frage ist es kompatiebel mitO.P.
Auch so zum Beispiel die TK16, bei Heng Long hat sich ganz schön was getan

Kettenpaul

94

Show and Tell / Re: High speed tracked vehicle....something different

« Last post by grahamn1956 on February 12, 2023, 11:57:48 AM »

Hi Graham,

I can well imagine your frustration and my apologies! When I was creating the Downloads page and other sections of the site I wasn't really thinking of people building their own, but now that is the only option you are right this information should be more prominently displayed. I've added a couple links to the TCB Hardware section that will hopefully help others avoid this kind of head scratching.

Thank you for the recommendation and I wish you success with your boards! If any other questions arise please don't hesitate to ask.

For anyone else at this stage, here is one of the links I posted, which explains the one-time bootloader process on blank chips:

Flashing Bootloader to Blank ATmega2560

Thank you Luke, I'm sure those links will help someone out.   

95

Show and Tell / Re: High speed tracked vehicle....something different

« Last post by LukeZ on February 12, 2023, 11:24:43 AM »

Hi Graham,

I can well imagine your frustration and my apologies! When I was creating the Downloads page and other sections of the site I wasn't really thinking of people building their own, but now that is the only option you are right this information should be more prominently displayed. I've added a couple links to the TCB Hardware section that will hopefully help others avoid this kind of head scratching.

Thank you for the recommendation and I wish you success with your boards! If any other questions arise please don't hesitate to ask.

For anyone else at this stage, here is one of the links I posted, which explains the one-time bootloader process on blank chips:

Flashing Bootloader to Blank ATmega2560

96

Show and Tell / Re: High speed tracked vehicle....something different

« Last post by grahamn1956 on February 12, 2023, 07:19:44 AM »

Hi Chi-el,

Sorry for the slow reply. I think the problem is almost certainly that the processor needs the bootloader installed first. When the board was under production we did this at the factory, but if you are assembling one from scratch then you have to do it yourself. If you buy an Arduino Mega the bootloader already comes installed, but when using a new chip it is blank.

The bootloader only has to be installed once on each board, after that you will not need to do it again. I've attached instructions for how to do this, you will need to buy a USBASP device. They are very cheap, here is one from China but you can probably find European sellers on eBay who have them. Notice the one I linked to gives you the option of buying an 8-pin to 6-pin adapter, you will need this version because we use a 6-pin ISP port on the TCB. Most places sell them with the adapter included.

In the instructions I discuss a pogo adapter, you won't need this because your boards already have pins installed on the ISP port, so you can just plug in the 6-pin cable from the USBASP directly into your board.

The instructions also mention using an FTDI adapter to load the firmware. You can ignore this and just your USB cable to load the firmware as normal. The FTDI adapter is faster when we are flashing hundreds of boards, but you only have to do two of them so it's no problem.

I hope this helps, let me know if you have any questions!


EDIT: No, it doesn't make a difference what position the fight/repair switch is in.

Gosh, I sure wish this was posted in the TCB portion of Downloads!  I have been scratching my head as to why my finished TCB boards (3 off) would not talk on USB, even going to the lengths of changing out one of the FT232 ic's in case it was a fake.  Everything working fine now but sheesh that was a voyage of discovery I could have done without!

97

News & Announcements / Re: It's all over?

« Last post by jhamm on February 06, 2023, 12:21:08 AM »

God Day to you Luke,
i am fine and the Life in germany goes expensive...

Yes, your´e right, the chip shortage and high prices reduce the number of users.
Every open panzer board that is offered somewhere is always sold very quickly - but that doesn't mean there are more of them.
It is all very well documented, but there are no new boards to buy...

98

News & Announcements / Re: It's all over?

« Last post by LukeZ on February 05, 2023, 01:41:49 PM »

Hi Jürgen! I hope you are doing well in Germany.

Well anyway I am still here lurking. Maybe the board has become so perfect there can be no more questions? No, I don't think that's it. 

But since no one can buy one for many years, and it is very difficult to build (maybe impossible now with the chip situation) I am not surprised it is quiet here.

99

News & Announcements / Re: It's all over?

« Last post by jhamm on February 02, 2023, 07:56:03 AM »

Nothing has been written here for many days ...
Is there no longer a TCB user?

100

Open Source Sound Dev / Re: Open Source Sound using Teensy 3.2 and PJRC Audio Library

« Last post by LukeZ on December 13, 2022, 08:36:23 AM »

Thanks Rongyos, it sounds really good! I posted them to the GitHub where anyone can download them.