Open Panzer
Open Panzer Help & Info => Open Panzer Help => Topic started by: KeesK on March 08, 2018, 11:58:22 AM
-
Hallo Tankers
In configurating my TCB I have the problem that i do not get the signal for my engines running
The engines are steerd by channel 1 and 2 of the transmitter but there is no output on 1 and 2, if I set it for RCoutput.
The same if I put it to the build in driver, the driver it self works because if I programm them for turret rotation and barrel elevation it functions
If I put the driving signals on channel 3 and 4 of the transmitter I also get no repons for the engines, but turret rotation and barrel elevation
do function on channel 1 and 2. Reading the radio I get proper signals on all 10 channels.
Porbably some thing simple as settings but sofar I have no idea what I do wrong.
Anybody an idea what I have to do to solve the problem?
thanks
KeesK
-
You need to create a function to start the engine. Until the TCB gets the engine start command, the vehicle will not respond to throttle and steering.
Assign this function to a switch, or if you don't want to mess with that check the "Auto-start Engine With Throttle" option on the Driving tab.
Connect your TCB to OP Config in Snoop mode to verify that you are able to start and stop the engine.
-
Hallo LukeZ
Thanks for your answer, this functions. Having not yet an soundcard for this system it did not accur to me, but it is logic
regards KeesK
-
Easy to overlook without sound! Glad you got it working.