61

Open Panzer Help / Re: MAC Platform possiblity

« on: February 23, 2017, 02:06:30 PM »

Thanks Luke! Will be great either way and who knows maybe somebody will configure it for Mac at some point

62

Open Panzer Help / MAC Platform possiblity

« on: February 23, 2017, 08:35:27 AM »

I love my Mac for all of my artistic tasks and wonder if this may ever be a platform for TCB?
No idea of the possible enormity of doing this but just thought I would ask

63

Open Panzer Help / Re: Gear change effect

« on: February 22, 2017, 12:30:16 PM »

Great points! Thank you

64

Open Panzer Help / Gear change effect

« on: February 22, 2017, 11:03:52 AM »

This was posted about some of the features that Elmod has..I have read though the wiki and curious if this type of effect of gear change effect also possible? (Unless I missed it and it is incorporated in the momentum/nudge effect or adjustments)

"You don't push the stick forward and the tank takes off, you push the stick forward and the driver blips the throttle, puts it into gear, and then its slowly starts moving, and without the user doing anything it changes gear, jolts, and carries on accelerating."

65

Open Panzer Help / Re: On / off switch

« on: February 20, 2017, 05:23:33 PM »

Thanks! And.. I could simply add the little step up after the output from the TCB so the on/off would be controlled via TCB eliminating the switch via receiver and I could adjust the voltage up or down.

66

Open Panzer Help / Re: Sabertooth driver 12 Ampx2

« on: February 20, 2017, 01:15:14 PM »

Thanks! Pretty cool can even use RC version (which I have) but will probably get the other one (non RC for the TCB) as I was going to
get one more for another tank using BARC/TBS atm.

67

Open Panzer Help / Sabertooth driver 12 Ampx2

« on: February 20, 2017, 07:57:32 AM »

I am currently using the Sabertooth 12 x2 and have the S1 and S2 cables plugged directly into the Elev/Ail on the
receiver. With this particular model would Sig 1 (Forward/backward) cable only plug directly into the TCB or is there
a combination that needs to be spliced in? Thanks

68

Open Panzer Help / Re: On / off switch

« on: February 19, 2017, 08:08:16 PM »

Okay good to know thanks Luke. I have an acoustic smoker and a step up that is increasing the voltage to the resistor to about 9 volts or so. I don't always need to run the smoke unit so the cut off.. But good to know it will work either way etc.

69

Open Panzer Help / On / off switch

« on: February 19, 2017, 07:56:40 PM »

Right now I have a on/off switch for my smoke unit plugged into the aux channel on my Dxi and assigned to the gear toggle.. with the TCB could I just keep that servo cable plugged in the receiver or could I plug it into the TCB and assign that function? Thanks

70

Open Panzer Help / Radio

« on: February 18, 2017, 09:06:58 PM »

I really like some of the 16 channel radios and may get one. Other than limited channels  as far as I can see the DXi 6 will work fine with the proper receiver with no changes to it (Dxi)

71

Open Panzer Help / Led Flash TCB and TBS

« on: February 07, 2017, 12:10:01 PM »

I currently have my Taigen recoil running off of the TBS and the barrel flash (which is a simple LED with two leads) plugged into the BARC.
To run the LED into the TCB would the LED light connect to the Flash port or another connector?