Differences

This shows you the differences between two versions of the page.

--- wiki:tcb:tcbinstall:sound_taigen_v1 [2017/07/26 03:35]
opadmin
+++ wiki:tcb:tcbinstall:sound_taigen_v1 [2017/10/18 17:22]
opadmin [Taigen Sound Cards]
@@ Line 4: / Line 4: @@
 ====== Taigen Sound Cards ======
-Taigen announced in 2017 plans to release a new version of their MFU with standalone sound boards. To use these with the TCB select **Taigen Sound Cards** on the [[wiki:opconfig:tabs:sounds|Sounds]] tab of OP Config. You will also need to make a simple adapter cable. On the TCB side you need a standard 3-pin servo plug and on the Taigen side you need a 4-pin JST PH plug. Connect this cable to the Prop 1 output on the TCB. The +5v signal from the TCB (middle pin on the servo connector) will actually need to be attached to two pins on the Taigen card. See the diagram below:
+Taigen announced in 2017 plans to release a new version of their MFU with standalone sound boards. To use these with the TCB select **Taigen Sound Cards** from the drop-down list on the [[wiki:opconfig:tabs:sounds|Sounds]] tab of OP Config. You will also need to make a simple adapter cable. On the TCB side you need a standard 3-pin servo plug and on the Taigen side you need a 4-pin JST PH plug. Connect this cable to the Prop 1 output on the TCB. The +5v signal from the TCB (middle pin on the servo connector) will actually need to be attached to two pins on the Taigen card. See the diagram below:
 \\
@@ Line 22: / Line 22: @@
   * Cannon hit
   * Vehicle detroyed
+**Note:** The Taigen sound card will not play the cannon, machine gun, or turret sounds unless the engine is also running.
 \\

wiki/tcb/tcbinstall/sound_taigen_v1.txt · Last modified: 2017/10/18 17:22 by opadmin

Taigen Sound Cards

Menu

Search

Random Fact

Differences