Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
wiki:tcb:tcbinstall:sound_benedini_micro [2019/12/14 14:50]
opadmin [Flash - Parameter Tab]
wiki:tcb:tcbinstall:sound_benedini_micro [2019/12/14 14:57] (current)
opadmin [Flash - Parameter Tab]
Line 50: Line 50:
  <li><b>Prop 2:</b> Set Prop 2 Input Mode to <b>RC</b> and Prop 2 Type to <b>2nd Function 1/2</b>.</li>  <li><b>Prop 2:</b> Set Prop 2 Input Mode to <b>RC</b> and Prop 2 Type to <b>2nd Function 1/2</b>.</li>
  <li><b>2nd Coder Functions:</b> In position 1 select the sound number from the Sounds tab that matches your cannon sound. In position 2 assign your machine gun sound.</li>  <li><b>2nd Coder Functions:</b> In position 1 select the sound number from the Sounds tab that matches your cannon sound. In position 2 assign your machine gun sound.</li>
- <li><b>Engine Start Mode:</b> Set to <b>Autostart</b>. When you start the engine on your TCB, the Micro will be given a signal to start playing engine sounds. There is however no way to tell the Micro to turn the engine off - instead, the Micro will automatically turn the engine off after 20 seconds of inactivity. </li>+ <li><b>Engine Start Mode:</b> Set to <b>Autostart</b>. When you start the engine on your TCB (using a function trigger defined in OP Config), the Micro will be given a signal to start playing engine sounds. There is however no way to tell the Micro to turn the engine off - instead, the Micro will automatically turn the engine off after 20 seconds of inactivity. </li>
  </ol>  </ol>
 </html> </html>
wiki/tcb/tcbinstall/sound_benedini_micro.txt ยท Last modified: 2019/12/14 14:57 by opadmin