Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision Both sides next revision
wiki:tcb:tcbinstall:rx [2016/05/11 03:27]
opadmin [Receiver Options]
wiki:tcb:tcbinstall:rx [2018/07/21 17:13]
opadmin [Receiver Options]
Line 5: Line 5:
 ====== Receiver Options ====== ====== Receiver Options ======
  
-The TCB is compatible with several types of hobby receivers - those that can output PPM (sometimes called CPPM or PPM-sum) and those that can output digital serial data. Of the latter type SBus and iBus are presently supported, but additional protocols can be easily be added to the firmware. You can find a PPM or serial receiver for literally every brand of radio available today, see our [[wiki:tcb:tcbinstall:rx:radioguide|Radio Selection Guide]] for recommendations. +The TCB is compatible with several types of hobby receivers - those that can output PPM (sometimes called CPPM or PPM-sum) and those that can output digital serial data. Of the latter type SBus and iBus are presently supported. You can find a PPM or serial receiver for literally every brand of radio available today, see our [[wiki:tcb:tcbinstall:rx:rxselection|Receiver Selection Guide]] for recommendations. If you don't yet have a transmitter, we also have several [[wiki:tcb:tcbinstall:rx:radioguide|Radio Recommendations]].
  
 **PPM** receivers are available for virtually every major brand of RC radio on the market today. The PPM protocol allows up to 8 channels of data on a single data line. Some PPM receivers may actually be called something like a "4 channel receiver" but what this means is that the receiver can only drive 4 servos directly, however all 8 channels should still be present on the PPM port, assuming the transmitter also has 8 channels.  **PPM** receivers are available for virtually every major brand of RC radio on the market today. The PPM protocol allows up to 8 channels of data on a single data line. Some PPM receivers may actually be called something like a "4 channel receiver" but what this means is that the receiver can only drive 4 servos directly, however all 8 channels should still be present on the PPM port, assuming the transmitter also has 8 channels. 
wiki/tcb/tcbinstall/rx.txt ยท Last modified: 2019/10/20 19:32 by opadmin