Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
wiki:tcb:tcbinstall:lights [2017/07/24 21:54]
opadmin [Lights]
wiki:tcb:tcbinstall:lights [2017/07/24 22:10] (current)
opadmin
Line 19: Line 19:
  
 ===== Light 2 ===== ===== Light 2 =====
-Light 2 has three [[wiki:​opconfig:​tabs:​ft|Functions]] that can be triggered: ​onoff and toggle+Light 2 has three [[wiki:​opconfig:​tabs:​ft|Functions]] that can be triggered: ​OnOff and Toggle. Additionally if you choose to implement a second machine gun you will plug the second machine gun LED into the Light 2 port
  
 ===== Brake Lights ===== ===== Brake Lights =====
Line 27: Line 27:
   * You can choose to have the brake light come on automatically whenever the vehicle is stopped.   * You can choose to have the brake light come on automatically whenever the vehicle is stopped.
   * You can also use the brake lights as "​Running lights"​ which is simply the light on at some level less than full brightness. You can specify what this brightness level should be in [[wiki:​opconfig:​tabs:​lightsio#​brake_and_running_lights|OP Config]]. You can then choose to have the running lights always on, or you can assign a trigger to one of the [[wiki:​tcb:​operation:​functionlist#​running_lights|Running Light Functions]] (on, off, or toggle). Either way, the brake light (full brightness) will always over-ride the running light (partial brightness),​ but only when braking occurs. ​   * You can also use the brake lights as "​Running lights"​ which is simply the light on at some level less than full brightness. You can specify what this brightness level should be in [[wiki:​opconfig:​tabs:​lightsio#​brake_and_running_lights|OP Config]]. You can then choose to have the running lights always on, or you can assign a trigger to one of the [[wiki:​tcb:​operation:​functionlist#​running_lights|Running Light Functions]] (on, off, or toggle). Either way, the brake light (full brightness) will always over-ride the running light (partial brightness),​ but only when braking occurs. ​
 +
 ===== Machine Gun Light ===== ===== Machine Gun Light =====
 Any light plugged into this output will flash when the machine gun function is triggered. The flash rate can be set in the OP Config program on the [[wiki:​opconfig:​tabs:​lightsio|Lights & I/O tab]]. ​ Any light plugged into this output will flash when the machine gun function is triggered. The flash rate can be set in the OP Config program on the [[wiki:​opconfig:​tabs:​lightsio|Lights & I/O tab]]. ​
wiki/tcb/tcbinstall/lights.txt ยท Last modified: 2017/07/24 22:10 by opadmin