Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
wiki:tcb:tcbinstall:boardlayout [2016/05/11 03:25]
opadmin [Left Side]
wiki:tcb:tcbinstall:boardlayout [2018/07/21 17:08] (current)
opadmin [Left Side]
Line 18: Line 18:
 {{ wiki:​dualconnector.jpg?​direct&​480|Radio Connector}} {{ wiki:​dualconnector.jpg?​direct&​480|Radio Connector}}
 ===Radio=== ===Radio===
-The TCB actually has dual radio connectors - one is located on the top of the board and the other on the bottom. The top connector is used for PPM or iBus receivers, and the bottom connector for SBus receivers (the bottom connector inverts the signal before feeding it into the processor). The easiest way to connect your receiver is with a standard male-to-male servo extension cable. The TCB automatically detects the type of receiver attached. As a rule, PPM receivers can have up to 8 channels, iBus supports up to 14 channels, and SBus receivers provide up to 16 channels. See the [[wiki:​tcb:​tcbinstall:​rx|Receiver]] page for more information on receiver types, and the [[wiki:​tcb:​tcbinstall:​rx:​radioguide|Radio Guide]] for some recommendations ​on radio systems.+The TCB actually has dual radio connectors - one is located on the top of the board and the other on the bottom. The top connector is used for PPM or iBus receivers, and the bottom connector for SBus receivers (the bottom connector inverts the signal before feeding it into the processor). The easiest way to connect your receiver is with a standard male-to-male servo extension cable. The TCB automatically detects the type of receiver attached. As a rule, PPM receivers can have up to 8 channels, iBus supports up to 14 channels, and SBus receivers provide up to 16 channels. See the [[wiki:​tcb:​tcbinstall:​rx|Receiver]] page for more information on receiver types including ​recommendations ​for receivers and radios.
 ===== Right Side ===== ===== Right Side =====
 ===USB=== ===USB===
wiki/tcb/tcbinstall/boardlayout.txt ยท Last modified: 2018/07/21 17:08 by opadmin