This is an old revision of the document!


Airsoft

The TCB is compatible with Taigen/Heng-Long airsoft units, but they must be re-wired. This requires some very simple soldering. You can still use the same plug that comes with the stock Airsoft unit, so no extra parts are required. After the modification is done, the unit will plug into the RECOIL port on the TCB.

For correct operation, make sure you select Airsoft as the Mechanical Barrel type on the Motors tab of OP Config (as opposed to the other option which is Mechanical Recoil).

See the video and photos below for instructions on how to modify the Airsoft unit.




Airsoft modification schematic

This schematic shows the difference in wiring between stock and modified



Modified Airsoft

Modified Airsoft unit



Modified Airsoft

Modified Airsoft unit



Airsoft and TCB

The Airsoft unit plugs into the RECOIL port on the TCB

wiki/tcb/tcbinstall/airsoft.1457895807.txt.gz ยท Last modified: 2016/03/13 19:03 by opadmin