Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
wiki:tcb:operation:quickstart [2017/01/09 21:24]
opadmin [TCB Quick Start Guide]
wiki:tcb:operation:quickstart [2017/01/09 21:25] (current)
opadmin [TCB Quick Start Guide]
Line 7: Line 7:
 <​li><​p><​b>​Install USB Drivers:</​b>​ The TCB requires genuine FTDI drivers which are available <a href="​http://​www.ftdichip.com/​Drivers/​VCP.htm"​ target="​_blank">​free from FTDI</​a>​. See the <a href="​doku.php?​id=wiki:​opconfig:​gs:​drivers">​USB Drivers</​a>​ page for a complete walkthrough on installing the drivers. </​p></​li>​ <​li><​p><​b>​Install USB Drivers:</​b>​ The TCB requires genuine FTDI drivers which are available <a href="​http://​www.ftdichip.com/​Drivers/​VCP.htm"​ target="​_blank">​free from FTDI</​a>​. See the <a href="​doku.php?​id=wiki:​opconfig:​gs:​drivers">​USB Drivers</​a>​ page for a complete walkthrough on installing the drivers. </​p></​li>​
 <​li><​p><​b>​Install OP Config:</​b>​ Download the Windows installer file from the <a href="​http://​www.openpanzer.org/​downloads/">​Downloads page</​a>,​ then install. If you already have OP Config installed, it's always a good idea to update it to the latest version (within OP Config go to the Help menu and select "Check for Updates"​).</​p></​li>​ <​li><​p><​b>​Install OP Config:</​b>​ Download the Windows installer file from the <a href="​http://​www.openpanzer.org/​downloads/">​Downloads page</​a>,​ then install. If you already have OP Config installed, it's always a good idea to update it to the latest version (within OP Config go to the Help menu and select "Check for Updates"​).</​p></​li>​
-<​li><​p><​b>​Test:</​b> ​Fire up OP Config, plug the TCB into your computer using a standard Micro-B USB cable, make sure Dipswitch #5 on the TCB is in the On position (this specifies communication over USB) and you <a href="​doku.php?​id=wiki:​opconfig:​gs:​connectto">​should be able to connect</​a>​.</​p></​li> ​+<​li><​p><​b>​Test:</​b> ​Plug the TCB into your computer using a standard Micro-B USB cable, make sure Dipswitch #5 on the TCB is in the On position (this specifies communication over USB) and you <a href="​doku.php?​id=wiki:​opconfig:​gs:​connectto">​should be able to connect ​with OP Config</​a>​.</​p></​li> ​
 <​li><​p><​b>​Flash the Latest Firmware:</​b>​ Your TCB board will come with firmware already installed, but it's always a good idea to use the latest release. In OP Config go to the <a href="​doku.php?​id=wiki:​opconfig:​tabs:​firmware">​Firmware tab</​a>,​ click "Get Latest Release",​ and then "​Flash"​ to your TCB.</​p></​li>​ <​li><​p><​b>​Flash the Latest Firmware:</​b>​ Your TCB board will come with firmware already installed, but it's always a good idea to use the latest release. In OP Config go to the <a href="​doku.php?​id=wiki:​opconfig:​tabs:​firmware">​Firmware tab</​a>,​ click "Get Latest Release",​ and then "​Flash"​ to your TCB.</​p></​li>​
 <​li><​p><​b>​Install the TCB in your Tank:</​b>​ the TCB will require at a minimum a few other items to be useful:</​p></​li>​ <​li><​p><​b>​Install the TCB in your Tank:</​b>​ the TCB will require at a minimum a few other items to be useful:</​p></​li>​
wiki/tcb/operation/quickstart.txt ยท Last modified: 2017/01/09 21:25 by opadmin