Show page

Menu

Search

Random Fact

This Wiki has 49 million pages and took 10 years to write!
(Well, close...)

If you like the Open Panzer project we accept donations!

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Last revision Both sides next revision
wiki:opconfig:tabs:misc [2018/07/02 04:13]
opadmin [Sabertooth Baud Rate Tool] 		wiki:opconfig:tabs:misc [2018/07/02 04:15]
opadmin [Scout ESC Settings]
Line 46: Line 46:
 ===== Scout ESC Settings =====  ===== Scout ESC Settings ===== 
  
 +{{ wiki:configurescout.png?nolink|Configure Scout Current Limit}}
 Here you can adjust the maximum current limit of any Scout ESC attached to your TCB. By default the Scout will stop the motors when current draw exceeds 12 amps total for both motors, since this is the Scout's limit for continuous operation without additional cooling. However the Scout can theoretically operate at up to 30 amps with sufficient heatsinking and cooling. Or you might wish to restrict the current limit to an even lower number in order to protect the drive-train on your model, if you already know the stall current of your motors. Set your desired maximum current here, and the TCB will instruct the Scout not to exceed that level. Here you can adjust the maximum current limit of any Scout ESC attached to your TCB. By default the Scout will stop the motors when current draw exceeds 12 amps total for both motors, since this is the Scout's limit for continuous operation without additional cooling. However the Scout can theoretically operate at up to 30 amps with sufficient heatsinking and cooling. Or you might wish to restrict the current limit to an even lower number in order to protect the drive-train on your model, if you already know the stall current of your motors. Set your desired maximum current here, and the TCB will instruct the Scout not to exceed that level.
  
wiki/opconfig/tabs/misc.txt ยท Last modified: 2020/01/08 17:26 by opadmin
Show pageSitemap
AdminBack to top