Registration Notice

Due to increased spam, forum registration must be manually approved by a moderator! Please see this post for instructions.

*

Offline Lotuswins

  • 160
    • View Profile
  • Roseburg, oregon
Cheap Remote Volume Control
« on: May 11, 2020, 04:48:59 PM »
So I've been making remote volume control for some time, using a cheap servo and the stock potentiometer for HL or Taigen.  Unfortunately this in line configuration doesn't give full rotation, the pot having a 270 degree sweep, and the servo only giving 120 degrees.  Enter a newly given 3D printer for my birthday, and having learned a little CAD on Fusion360, and finding an insert into the program to do spur gears, I've assembled this configuration which gives full travel:

The long M3 screws are 25mm long, you have to drill the gears to fit the pot and servo splined shafts, but be careful as you don't want to drill all the way through.  When assembling, plug both the servo and the pot into the tank, and turn the pot clockwise until the volume just goes to zero, and using the transmitter turn the servo counter clockwise all the way and then pop the large gear onto the servo.  Test to ensure it travels smoothly all the way to both stops.  The cover keeps you from jamming any wires into the gears. 

It fits rather well into a crook or cranny in the tank pretty easily. 

I'll load the .stl files next post.

Jerry
IMG_0732.JPG
Cheap Remote Volume Control IMG_0732.JPG
Views: 5130
IMG_0734.JPG
Cheap Remote Volume Control IMG_0734.JPG
Views: 1054
IMG_0735.JPG
Cheap Remote Volume Control IMG_0735.JPG
Views: 1003
IMG_0737.JPG
Cheap Remote Volume Control IMG_0737.JPG
Views: 998
IMG_0738.JPG
Cheap Remote Volume Control IMG_0738.JPG
Views: 988
IMG_0739.JPG
Cheap Remote Volume Control IMG_0739.JPG
Views: 902
IMG_0733.JPG
Cheap Remote Volume Control IMG_0733.JPG
Views: 908

*

Offline Lotuswins

  • 160
    • View Profile
  • Roseburg, oregon
Re: Cheap Remote Volume Control
« Reply #1 on: May 11, 2020, 05:12:04 PM »
.stl files for those who might be interested....

Jerry

Note: 

Cost is $3 for servo from HK, and $6 for the pot from IMEX/Taigen, other than the hardware and new 3D printer....;)

j
*
8ToothGear.stl
(101.45 kB ~ Downloads: 469)
*
18tgear.stl
(197.54 kB ~ Downloads: 472)
*
BaseV5.stl
(74.89 kB ~ Downloads: 461)
*
CoverV5.stl
(108.48 kB ~ Downloads: 469)
« Last Edit: May 11, 2020, 07:25:19 PM by Lotuswins »

*

Offline jhamm

  • 142
  • It´s a hobby no profession!
    • View Profile
  • Germany
Re: Cheap Remote Volume Control
« Reply #2 on: May 12, 2020, 03:26:23 AM »
Hey Jerry,
I do that some years ago.
link the Potentiometer Shaft with a short piece of tube on a little Servo and glue  together with a strip of plastic.

Thank you for the Files.

*

Offline LukeZ

  • 1241
    • View Profile
  • France
Re: Cheap Remote Volume Control
« Reply #3 on: May 12, 2020, 07:11:09 AM »
Very cool Jerry, I like it! I'm sure people without a 3D printer should be able to use the stl files to order a premade part from Thingiverse or somewhere. I'm sure this would interest RC tankers in general since it is universally compatible.
NO SUPPORT THROUGH PM - Read why
Need a forum account? Read here
Open Panzer FAQs

*

Offline Snipah

  • 18
  • As Real as Models can sound
    • View Profile
  • New Zealand
Re: Cheap Remote Volume Control
« Reply #4 on: June 25, 2020, 03:34:37 AM »
Hey great idea, thanks for posting
As Real as Models can sound

*

Offline LukeZ

  • 1241
    • View Profile
  • France
Re: Cheap Remote Volume Control
« Reply #5 on: July 26, 2020, 01:45:57 PM »
Jerry just wanted to let you know that I put a link to this project on the Downloads page under the Accessories section. I should have done that before! It really is a useful little device, cheap to build, and lots of people have 3D printers now so I hope others will get to try it out.
NO SUPPORT THROUGH PM - Read why
Need a forum account? Read here
Open Panzer FAQs

 

bomber-explosion