Open Panzer
Open Panzer Help & Info => Show and Tell => Topic started by: jhamm on July 13, 2017, 12:35:53 AM
-
Hi there,
Yesterday the boards arrived by UPS. ;D
Most important cables connected and go...
Here the test set-up:
- Transmitter Turnigy TH9x with AR9x Board and Frsky XJT Moduke
- Reciever Frsky X8R or Quanum FR8 (both work great)
- 2x Brushless 18/50A Sensorless ESC
- 2x HK Track 380 Sensorless Brushless Motor 3200KV
- some Servo
(http://www.hyperstation.de/HLPF/OPB4.jpg)
The parameterization of the Controlbaord is very easy.
Connect the Reciever to OPCBoard and and turn on the transmitter => Do not forget to bind the transmitter and receiver before!
Plug USB in OPCBoard - its powered by USB and start up automatically.
Start the Open Config and push "Connect" - If this done push "Read Radio".
Is everything connected and set correctly, this should look like this:
(http://www.hyperstation.de/HLPF/OPB5.jpg)
That was the hardest part... :o
Now you can make the settings.
Have Fun!