0.92.08
07/25/2017

Release Notes
---------------------------------------------------------------------------------------------------------
-  Added dedicated second machine gun functions. The effect could be created previously with the Aux output, 
   but the dedicated functions simplify the process and leave the Aux output free for other uses. 
   If implemented, the second machine gun light should be connected to the L2 (Light 2) port. The second 
   machine gun has its own blink interval setting available in OP Config, independent of the primary 
   machine gun blink interval. The second machine gun will automaically trigger a sound effect if the sound 
   card supports it. For the Benedini this will be whatever sound is placed in slot 11 of the 1st coder 
   column in TBS Flash (otherwise called User Sound 3). For the Open Panzer Sound Card just add the sound 
   files with the appropriate names to the micro SD card. 
-  CRC checking has been added to the code that communicates with Pololu serial motor controllers. This 
   prevents the Pololu from mistakenly reacting to messages intended for other devices (for example the 
   Open Panzer Sound Card). You must also enable CRC mode on your Pololu controller by using the jumper 
   as shown in the Pololu instructions. 
-  IMPORTANT NOTE: Changes in this release will cause all EEPROM settings to be reverted to default after the 
   firmware is flashed. It is advised to save an OPZ file of your settings before re-flashing.